|
[China]
Trade Verify
Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China
Contact name:Richard SHEN
TORICH INTERNATIONAL LIMITED |
|
Verified Suppliers
|
|
|
TORICH Stainless Steel Small Medical Injection Moulding Machine Medical Tubes
| Commodity name |
Small diameter bright annealing seamless stainless steel capillary tube
|
| Process method | cold rolled/cold drawn |
| Stainless steel grades | TP304/304L, TP310/S,TP316/316L, TP317L, TP321, TP347/H S31803/2205, 904L |
| Standard | ASTM A213, A312, A511, A270, A269, A789, A790, DIN17456, DIN17458, JIS G3463 |
| Size | 0.8x0.1...... |
| Testing | Chemical Analysis. Air Under water Testing Ultrasonic Testing Eddy Current Testing |
| tube surface | Bright annealing |
| Packing | bundle, plywood case, both end with caps,seaworthy packing. |
| Application | 1. General service 2. Curatorial Industry 3. Food Industry 4. Ornamental 5. Aerospace Industry 6. Petrochemical 7. Fluid transport 8. Nuclear Industry 9. Boiler heat- exchanger 10. Oil and gas service |
304 / 304 L:
The most common 300 stainless series alloy, good corrosion resistance, cold working characteristics and
relative cost effectiveness make this our most popular alloy. The "L" grade version has a lower carbon
content for reduced carbide precipitation during secondary welding operations.
17-7:
The addition of aluminum in this alloy provides improved tube strength and hardness while maintaining
good corrosion resistance. Can be heat treated to a higher tensile strength than can be achieved by cold work alone.
302:
Very similar corrosion resistance to stainless 304, but higher strength due to carbon content.
Typically not available in tubing, wire/solid only.
321:
Increased strength and corrosion resistance, especially at higher temperatures, are characteristics of this
alloy due to the addition of titanium to the base metal.
316 / 316 L / 316 LVM:
The addition of molybdenum to the base metal improves corrosion resistance for use in medical / food
service and other demanding tubing applications. "L" grade is a low carbon version for reduced carbide
precipitation during secondary welding operations. 316 LVM is melted in a vacuum to reduce impurities and and
create a uniform chemistry.
303:
An ideal stainless steel alloy for machining parts due to the addition of elements which reduce tool wear / expense.
Available for machined parts only, not offered as tubing.
347:
Characteristics are similar to 321, but the addition of several alloys allows tubing to withstand high temperatures
for longer periods.Aluminum 3000 & 6000 series: Lightweight, cost effective and easy to form, Aluminum is popular
for a variety of applications including aerospace and industrial.
Brass 260:
Composed of 70% Copper and the balance Zinc, this very ductile metal can be used in corrosive environments for
a wide variation of applications from appliance parts and ammunition cartridge cases to ornamental hardware.
