TORICH INTERNATIONAL LIMITED |
Verified Suppliers
|
|
ASTM B167/5580 INCONEL 600 NiCr15Fe NC15FE NO6600 High Nickel High Strength Seamless Alloy Steel Tubes
Inconel 600 is a nonmagnetic nickel-chromium alloy with excellent resistance to oxidation and other forms of high temperature corrosion. This alloy also has excellent mechanical properties and presents desirable combination of high strength and good workability. Used for furnace and chemical-treatment components, in food processing, in nuclear engineering, and for engine and airframe components.
Welding of Inconel 600
Any traditional welding procedures can be used to weld Inconel 600
to similar alloys or other metals. Before welding, preheating is
needed and also any stain, dust or mark should be cleared by steel
wire brush. About 25mm width to welding edge of base metal should
be polished to bright.
Recommend filler wire regarding welding Inconel 600: ENiCr-3
Chemical Composition
Grade | Ni% | Mn% | Fe% | Si% | Cr% | C% | Cu% | S% |
Alloy 600 | Min 72.0 | Max 1.0 | 6.0-10.0 | Max 0.50 | 14-17 | Max 0.15 | Max 0.50 | Max 0.015 |
Specifications
Grade | British Standard | Werkstoff Nr. | UNS |
Alloy 600 | BS 3075 (NA14) | 2.4816 | N06600 |
strongPhysical Properties
Grade | Density | Melting Point |
Alloy 600 | 8.47 g/cm3 | 1370°C-1413 °C |
Mechanical Properties
Alloy State | Tensile Strength | Yield Strength | Elongation | Brinell Hardness (HB) |
Annealing Treatment | 550 N/mm² | 240 N/mm² | 30% | ≤195 |
Solution Treatment | 500 N/mm² | 180 N/mm² | 35% | ≤185 |
Our Inconel 600® tube also meets numerous other national and international standards, including:
ASTM B167
ASTM B571
ASTM B829
ASTM B775
ASTM B705
ASTM B704
AMS 5581
ISO 6207
and others