TORICH INTERNATIONAL LIMITED |
Verified Suppliers
|
|
Din 2391 High Pressure Bright Annealing Seamless Precision E235 Steel Tube
1. DIN2391 high precision bright seamless steel pipe
Made of Baosteel's high-quality carbon steel material, after
precise drawing, non-oxidative bright heat treatment (NBK state),
non-destructive testing, the inner hole of the steel pipe is
subjected to high-pressure washing and pickling, the inner and
outer walls of the steel pipe are treated with anti-rust oil, and
both ends are sealed as Dust-proof treatment.
The steel pipe produced has high precision and good finish, and
there is no oxide layer on the inner and outer walls of the steel
pipe. Mechanical properties can be bent at any angle without
deformation. It is mainly used to prepare steel pipes in the oil
circuit of hydraulic systems, also called hard piping in hydraulic
systems, and precision steel pipes for automobiles.
2. DIN2391 high-precision black phosphating steel pipe
Based on DIN2391 high-precision bright seamless steel pipe, the
inner and outer walls of the bright precision steel pipe are
phosphated with the dilution formula of phosphating agent, and a
black protective film is formed on the inner and outer walls of the
steel pipe to protect the steel pipe from rust. Black phosphating
steel pipe is shiny in black, good color and strong rust
resistance.
High-precision black phosphating steel pipe is mainly used for
piping in hydraulic system, and it is more ideal to use with
ferrule (steel pipe) joint.
3. DIN2391 high-precision precision galvanized steel pipe
The high-precision bright seamless steel pipe is used to
electro-galvanize it, and the inner and outer walls of the steel
pipe are plated with yellow zinc (color zinc), white zinc, and
passivation treatment. The length of the galvanized steel pipe can
be within 6 meters.
Mainly used in automobile, military, aircraft, agricultural and
forestry machinery, construction machinery, railway vehicles and
other industries
Application : Hydraulic tubes.
Material: E235 St35 St45 St52 E355
Standard : DIN 2391 EN10305-1
Surface treatment: Galvanizing, to protect material from rust.
OD : 4- 20mm
WT :0.5-10 mm
Characteristic:
1.Bright annealing treatment on steel tubes, have a clean in side and out size diameter,Besides, what is suitable for bending any angle for your produce your production.
2.Galvanizing on tubes can bear the Salt spray test above 72 hours.
3.Steel tubes produce by cold drawn and cold rolled many times ,With a good tolerance on OD and WT.
Steel Grade and Chemical Compositions:
Steel Grade | C | Si | Mn | P | S | Al | |
Steel Name | Steel Number | max | max | max | max | max | min |
E215 | 1.0212 | 0.10 | 0.05 | 0.70 | 0.025 | 0.025 | 0.025 |
E235 | 1.0308 | 0.17 | 0.35 | 1.20 | 0.025 | 0.025 | - |
E355 | 1.0580 | 0.22 | 0.55 | 1.60 | 0.025 | 0.025 | - |
Mechanical properties at room temperature | |||||||||||||
Steel Grade | Minimum values for the delivery condition | ||||||||||||
Steel Name | Steel Nubmer | (+Cc) | (+LCc) | (+SR) | (+Ad) | (+N) NBK | |||||||
Rm Mpa | A % | Rm Mpa | A % | Rm Mpa | ReH Mpa | A % | Rm Mpa | A % | Rm Mpa | ReH Mpa | A % | ||
E215 | 1.0212 | 430 | 8 | 380 | 12 | 380 | 280 | 16 | 280 | 30 | 290-430 | 215 | 30 |
E235 | 1.0308 | 480 | 6 | 420 | 10 | 420 | 350 | 16 | 315 | 25 | 340-480 | 235 | 25 |
E355 | 1.0580 | 640 | 4 | 580 | 7 | 580 | 450f | 10 | 450 | 22 | 490-630 | 355 | 2 |