TORICH INTERNATIONAL LIMITED |
Verified Suppliers
|
|
EN10305-1 Precision Steel Tube , Hydraulic Cylinder Tubing cutting to Specified Length
TORICH is one of the main suppliers for precision seamless steel pipe, as a top precision steel tube manufacturers in China, we have been exporting to ver 56 counties worldwide for high precision seamless steel pipe, which is widely used in Hydraulic Cylinders.
Standard for precision metal tubing:
EN10305-1 Seamless Cold Drawn/Rolling Steel Tubes
Precision Seamless Steel Tube are for Application of:
For Hydraulic Cylinder/Oil Cylinder Tube/Excavator Chains and Parts
Size range:
O.D.:6-380mm
W.T.:1-35mm
L:max12000mm
Steel Grade and Chemical
Compositions:
Steel Grade | C | Si | Mn | P | S | Al | |
Steel Name | Steel Number | max | max | max | max | max | min |
E215 | 1.0212 | 0.10 | 0.05 | 0.70 | 0.025 | 0.025 | 0.025 |
E235 | 1.0308 | 0.17 | 0.35 | 1.20 | 0.025 | 0.025 | - |
E355 | 1.0580 | 0.22 | 0.55 | 1.60 | 0.025 | 0.025 | - |
Mechanical properties at room temperature | |||||||||||||
Steel grade | Minimum values for the delivery condition | ||||||||||||
Steel Name | Steel Nubmer | (+Cc) | (+LCc) | (+SR) | (+Ad) | (+N) NBK | |||||||
Rm Mpa | A % | Rm Mpa | A % | Rm Mpa | ReH Mpa | A % | Rm Mpa | A % | Rm Mpa | ReH Mpa | A % | ||
E215 | 1.0212 | 430 | 8 | 380 | 12 | 380 | 280 | 16 | 280 | 30 | 290-430 | 215 | 30 |
E235 | 1.0308 | 480 | 6 | 420 | 10 | 420 | 350 | 16 | 315 | 25 | 340-480 | 235 | 25 |
E355 | 1.0580 | 640 | 4 | 580 | 7 | 580 | 450 | 10 | 450 | 22 | 490-630 | 355 | 22 |
aRm: tensile strength; ReH: upper yield strength; A:
elongation after fracture
b 1Mpa=1N/mm2
c Depending on the degree of cold work in the finishing pass the
yield strength may nearly be as high as the tensile
strength.
For calculation purposes the following relations are
recommended:
for delivery condition +C: ReH ≥0.8 Rm
for delivery condition +LC: ReH ≥0.7 Rm
d For calclulation purposes the following relation is
recommended:ReH≥0.5Rm
e For tubes with outside diameter ≤30mm and wall thickness ≤3mm the
ReH minimim values are 10Mpa lower than the values given in this
Table
f For tubes with outside diameter>160mm: ReH≥420Mpa
Note: Special steel grade is also available, according to customer request.
Cutting and Packing: