Active Member
|
[China]
Address: 8th Floor, Venture Building, Zhongxin Road,Xinqiao Street, Bao'an District, Shenzhen
Contact name:
Shenzhen Bede Mold Co., Ltd |
|
|
2 Flutes Corner Radius End Mill Cutter CNC Cutting Tools for Cast
Iron and Ordinary Steel
Description
The cemented carbide / hard alloy / kentanium is mainly sintered with tungsten carbide
powder, cobalt as a binder. With the increase of cobalt
content, the toughness of the material increases, but the hardness
decreases. By adjusting the content of cobalt, tool materials
suitable for different environments can be obtained. It is
widely used in high-speed cutting tools with good rigidity and
simple edge shape. With the development of technology, complex
cutting tools are gradually expanding their applications.
When the material to be cut is relatively soft, such
as copper and plastic, high-speed steel is selected as the material
of the tool to reduce the cost.
Quick Details
According to the bottom surface,cutting tools are divided
into Square-end cutters, ball nose end cutters, Corner radius-end cutters. The Square-end cutters are used for machining flat parts,Corner
raduis end cutters are used for chamfered products, and the
ball-end cutters are used for machining 3D curved surfaces of
products.
| materials | high speed steel | tapy | Corner Radius End | |||||||
| treatment | TiN PVD coating | Flutes | 2 Flutes | |||||||
| tolerance | 0.001mm | ODM / OEM | welcome | |||||||
| Suitable material for cutting | Ordinary steel | Prehardened steel | stainless steel | cast | Alumium alloy | Cooper Alloy | ||||
| HRC~39 | HRC~39 | HRC~35 | ||||||||
| best | Best | good | Best | good | good | |||||
Size
The following Size cutter was in stock, can be
sent in 3 work days after payment. If it will be customized, plz
tell us the values of following pictrue show or sent a drawing to
us, angthing else, we will do it for you.
| D/mm | d/mm | R can be chosen | l/mm | Neck tilt angle | L/mm | |||
| 6 | 8 | 0.5 | 1 | 8 | 15° | 60 | ||
| 8 | 10 | 0.5 | 1 | 10 | 15° | 60 | ||
| 10 | 10 | 0.5 | 1 | 3 | 10 | / | 70 | |
| 12 | 12 | 0.5 | 1 | 3 | 12 | / | 80 | |
| 16 | 16 | 1 | 3 | 16 | / | 95 | ||
| 20 | 20 | 1 | 3 | 20 | / | 110 | ||
| 25 | 25 | 3 | 5 | 25 | / | 120 | ||
Treatment
Physical Vapor Deposition (PVD) is an advanced
surface treatment technology widely used in the world. Its working
principle is that the gas or evaporated substance is partially
ionized by gas discharge in vacuum, and the evaporation or its
reactants are deposited on the substrate while the gas ions or the
evaporated substance ions are bombarded.
A cutter tool treat by PVD, the friction
coefficient is obviously reduced, which greatly improves the
temperature resistance and service life of the cutter.
Advantage
1, Ideal for cutting from quenched and tempered steel
(~45HRC) to high hardness steel (~65HRC) workpiece materials.
2, The XCP coating with high coating hardness and excellent
heat resistance can provide superior performance even at high speed
cutting.
3, Using original chip flutes, the depth of groove cutting
can be comparable to that of the 2-blade type.
4, The edge of the blade is processed through the arc
angle to minimize the edge of the blade.
5,Multidimensional scanning equipment for quality control
Every product we produce is scanned by
multi-dimensional instruments, and no defective product is allowed
to appear in front of customers.
Packing and Shipping
Our products are packaged with plastic shell to protect
the edges of cutters.
About the shipping, all the well-known express companies and
ocean shipping can be selected, but in remote areas, we can only
use EMS.
