AL6061 Cylinder CNC Lathe Machining Parts Anodic Oxidation Treatment

^{1. Provide the detailed production schedule for each order.}

^{2. Offering production status with video and photos for each component.}

^{3. Manufacture the parts base on customers' drawings to meet the quality requirements and industry standard.}

^{4. Over 99% orders can meet the lead time requirement.}

^{5. Respond to the enquiry within 24 hours and offer the quotation within 48 hours.}

^{6. Using the first-rank raw materials which also can be traced.}

^{7. Provide the most competitive price with the high quality and service standard.}

^{8. The most reasonable packing scheme for all products.}

FAQ:

_{Q1: What is a turning insert?}

_{A: W - trigon 80° C and W type turning inserts are often used for rough machining due to their larger point. angle, which makes them more rigid. Inserts with a smaller point angle, such as D and V, are often used for finish machining.}

_{Q2: Which type of surface is produced in turning operation?}

_{A: Turning is a process of removing excess material from the work-piece to produce an axisymmetric surface, in which the work-piece rotates in a spindle and the tool moves in a plane perpendicular to the surface velocity of the job at the tool-job contact point.}

_{Q3: What is the difference between turning and knurling?}

_{A: Straight knurling is often used to increase the workpiece diameter when a press fit is required between two parts.}

_{Q4: What is spindle speed?}

_{A: The spindle speed is the rotational frequency of the spindle of the machine, measured in revolutions per minute (RPM). The preferred speed is determined by working backward from the desired surface speed (sfm or m/min) and incorporating the diameter (of workpiece or cutter).}

_{Q5: What is depth of cut in turning?
A: It is the total amount of metal removed per pass of the cutting tool. It is expressed in mm. It can vary and depending upon the type of tool and work material. Mathematically, it is half of difference of diameters. Depth of cut (t) = D-d/2 mm.}

_{Q6: What is turning milling and drilling?}

_{A: Turning operations are operations that rotate the workpiece as the primary method of moving metal against the cutting tool. Lathes are the principal machine tool used in turning. Milling operations are operations in which the cutting tool rotates to bring cutting edges to bear against the workpiece.}​

^{Q7: How are aluminum parts manufactured?
A: Because we use aluminum in a broad range of applications, there are 5 different ways to fabricate aluminum parts: aluminum CNC machining, aluminum extrusion, sheet metal, aluminum casting and forging of aluminum.}

^{Q8: What are CNC turned parts?
A: CNC turning is the computer-aided manufacturing process for turning parts. CNC stands for “Computerized Numerical Control”. The components are individually programmed. With this production programme, the lathes can then automatically produce the CNC turned parts.}