Non Standard BOHLER M300 Die Steel Ejector Pin For Daily Cosmetic Plastic Parts

Introduction Of Ejector Pin

Steel pin, preferably made of 1.2343 material and hardened, usually cylindrical (with a cylindrical or conical head), used for the ejection of castings from gravity dies, pressure dies and core boxes.

Cylindrical ejector pins with a cylindrical head are standardized in DIN ISO 6751 (DIN 1530-1) and cylindrical pins with a conical head in DIN 1530-3. An overview of types of ejector pins can be found in Fig. 1.

The ejector pins used for cores can be divided into blind and contour ejector pins. Blind ejector pins cause a core box to open by pressing against its opposite parting surface upon hardening of the core material. In the retracted condition, these ejectors must be recessed from the parting surface by about 0.2mm to ensure that the core box parting plane closes tightly when the two halves are combined. Contour ejector pins need to be flush with the core box contour and can neither protrude from the contour nor be recessed from it. Hollow ejector pins are called ejector sleeves.

In die casting tools, cylindrical ejector pins with a cylindrical head made of hardened and nitrated 1.2343 material are usually used.

Specification Of Ejector Pin

Our Service:

1,More than 15 years professional manufacture experience in this field

2. EDM (Sodick) processing part, our core of EDM processing part reflect on the dimensional accuracy(2-3um), copy accuracy and surface roughnessRa0.3), which are able to achieve the mold part demand for micro connector, mobile,auto,computer connector.

3. WDM-LS(MITSUBISHI) processing part, accuracy 0.0015-0.003mm, roughness Ra<0.5um.

4. Grinding part, special guys responsible for the equipments daily maintenance, make sure them work smoothly, Maximum the grinding accuracy <1um

5. Custom nonstandard parts, we strict follow your drawings to produce parts so it can perfect fit your machine, all the parts accuracy can roughness<Ra0.03, grinding<1um.

5. Standard mould part.

6. Plastic mould, precision design and processing connector mould for electronic products, but we can produce other plastic mould also.

7. Punching mould.

RQA:

Q1:What Is Your Business Scope?

A: Our business scope is all the mold parts including Standard and Non Standard etc.

Q2: How Long Does It Take To Execute My Order?

A: That depends on the size and complexity of the order.

Please tell us the quantity and model number of the products you are about to order, so that we will give you a detailed schedule.

Q3: How Can I Know The Completion Of My Order?

A: Upon receipt of the deposit, we will immediately arrange for the production, after the order is completed, we will inspecand test all products carefully to ensure no damage and lost, we will also send you the detection images of your order before delivery for you to confirm Statement: Colors of products may vary slightly from actual color due to photography, scanning, etc.

Q4: Can You Arrange To Deliver The Goods For Us?

A: Yes. When finish the orders, we will inform you and also we can arrange the shipping in the same time.

There is LCL shipping and FCL shipping for different order term,the buyer also can choose Air-transport or Ocean shipping for your requirement .When your orders reach your local nearest Seaport or River port, the logistics company will infrom you.

Q5: Can You Guarantee Your Products?

A: Yes, we guarantee your 100% satisfaction on all our products.

Please feel free to give us feedback immediately if you are not satisfied with quality or service, if the product does not meet the contract requirements, we will send you a free replacement or give you compensation in the next order.

Q6: Can I Visit Your Factory?

A: Of course, We always with great pleasure at your service .

If you want to order our products ,please contact us to make an appointment.