Active Member
|
[China]
Address: China Zhejiang Wenzhou Economic Development Zone
Contact name:
Zhejiang THOR Electric Co., Ltd |
|
|
The PDU cabinet power socket 8 10A GB / Aluminum Alloy Lightning Overload switch socket
Brief introduction
The special lightning protection socket of the cabinet
(PDU power supply lightning protection socket, power distribution
unit) is specially designed for communication and electronic
equipment in the operation of overvoltage and lightning induction
frequently. Its shape adapts to the standard 19 "internal
installation of the cabinet; the national standard jack fits all
kinds of power pluggers; it is mainly used for a single phase 220V
power supply system." Electronic equipment such as light end
machine, PCM, network switch, computer and precision electronic
instrument and other terminal electronic equipment, such as the
last level of surge protection, this product is widely used in
aviation, power station, ship, communication, electronic
information network and other fields.
Working principle of product
The surge protector of PDU lightning protection socket
is very high when no voltage is needed, which is equivalent to
breaking circuit. When the voltage occurs, the impedance drops to a
few Europe, and the surge current will flow through the surge
protector and will not enter the device. At the same time, because
the surge protector has a small impedance at this time, the voltage
on both sides of the surge is relatively small, and because he is
in parallel with the protected equipment, it prevents the equipment
from suffering from large surge power. Pressure, so as to play the
effect of discharge and pressure limiting.
Product features
1. the inner sleeve is made of all phosphorus bronze
strip, with good conductivity and elasticity.
2. filter circuit can absorb the surge of radio frequency /
electromagnetic interference and output pure power.
3. common mode and differential mode all azimuth protection
Product specification
| Model | TRS-PDU | |
| Rated Operating Voitage | UC | 250V～ |
| Voltage protective level | Up(KV)≤ | 1.0 |
| Max discharge current | Imax(KA) | 6 |
Nominal discharge current
| In(KA) | 3 |
| Protection mode | L-N | |
| technical parameter | MAX2.5KW-MAX10A | |
Working principle of product
The surge protector of PDU lightning protection socket
is very high when no voltage is needed, which is equivalent to
breaking circuit. When the voltage occurs, the impedance drops to a
few Europe, and the surge current will flow through the surge
protector and will not enter the device. At the same time, because
the surge protector has a small impedance at this time, the voltage
on both sides of the surge is relatively small, and because he is
in parallel with the protected equipment, it prevents the equipment
from suffering from large surge power. Pressure, so as to play the
effect of discharge and pressure limiting.
Use of attention
1. this product is limited to indoor dry environment.
2. when multiple plugs are inserted at the same time, the
total power load should not exceed the maximum allowable power.
3. the load power of lightning protection socket should
not exceed the rated power of lightning protection socket.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical
support.
Thor is following the international quality system
standards, is ISO 9001 certified and our technical standards are in
line with GB18802.1-2011/IEC61643-1.
Product packaging:Carton packing
Transportation method
2. Trains, ships, aircraft transport
