Home Companies Shenzhen Chuangxinji Smart card Co.,Ltd

213 RFID Tag Sticker Clear Inlay , RFID Label Sticker Nfc Transparent

Active Member

Contact Us

[China]

Address: 12&23Level,Xinhe Aiqin Ju,Buji street,Longgang district ,Shenzhen,518112，Guangdong,China

Contact name:Lucy Lu

Shenzhen Chuangxinji Smart card Co.,Ltd

213 RFID Tag Sticker Clear Inlay , RFID Label Sticker Nfc Transparent

Country/Region	china
City & Province	shenzhen guangdong
Categories	Access Control Card

Product Details

213 NFC Sticker Clear inlay Transparent nfc label

213, 215, and 216 have been developed by NXP® Semiconductors as standard NFC tag ICs to be used in mass-market applications such as retail, gaming, and consumer electronics, in combination with NFC devices or NFC-compliant Proximity Coupling Devices. 213, 215, and 216 (from now on, generally called 21x) are designed to fully comply to NFC Forum Type 2 Tag and ISO/IEC14443 Type A specifications.

Target applications include Out-of-Home and print media smart advertisement, SoLoMo applications, product authentication, NFC shelf labels, and mobile companion tags.

Material	Paper,PET,PVC,etc
Size	Dia12mm,20mm/22mm/25mm/30mm,or customized
Frequency	13.56Mhz
Printing	CMYK Offset Printing
Type	Passive
Reading range	1- 5cm (Depending on reader)
Customization options	Encoding , UID printing, barcode, QR code etc.
Data Endurance	More than 10 years

is the NXP Semiconductors-owned trademark of a series of integrated circuit chips used

in contactless smart cards and proximity cards. The brand name covers proprietary solutions based

upon various levels of the ISO/IEC 14443 Type A 13.56 MHz contactless smart card standard.

It uses AES and DES/Triple-DES encryption standards, as well as an older proprietary encryption

algorithm, Crypto-1. According to NXP, 10 billion of their smart card chips and over 150 million

reader modules have been sold. is owned by NXP Semiconductors

Available Chips

High Frequency Chips(13.56Mhz)
IEC 14443A
1. Classic® 1K, Classic® EV1 1K, Classic® 4K
2. Plus® 1K, Plus® 2K, Plus® 4K
3. ® DESFire® 2K, ® DESFire® 4K, ® DESFire® 8K
4. ® 203 (144 bytes), 213 (144 bytes), ® 215 (504 bytes), ® 216(888 bytes)
5. Ultralight® (48 bytes), Ultralight® EV1 (48 bytes), Ultralight® C(148 bytes)
Protocol ISO 15693/ISO 18000-3
1. ® SLIX, ® SLIX-S, ® SLIX-L, ® SLIX 2
Remark: and Classic are registered trademarks of NXP B.V. and are used under license. and Plus are registered trademarks of NXP B.V. and are used under license. DESFire are registered trademarks of NXP B.V. and are used under license. and Ultralight are registered trademarks of NXP B.V. and are used under license. are registered trademarks of NXP B.V. and are used under license. are registered trademarks of NXP B.V. and are used under license.

An rfid inlay is the most basic and cost-effective type of rfid tag. rfid inlays can be used alone or embedded and converted into
other products by product manufacturers. The surface material of an rfid inlay is plastic, not paper, which makes them water
resistant; however, they have no protective structure and are subject to damage due to bending or compression.

RFID Tag are used in applications where the quick exchange of a few bits of digitized information comes in handy.

One of the more
commonly known ways they're used are in smartphones to make mobile payments; NFC tags are the reason

some phones can simply be
tapped to a reader to pay for something.