|
[China]
Trade Verify
Address: Room 408, No.801 Hongqiao road, Wuxi, Jiangsu, China
Contact name:Helen Bo
Wuxi Biomedical Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Derma Roller 192 Needles 0.5mm for Face Care and Hair-Loss Treatment
Features
Specification
| Needle Number | 192 needles | |||
| Needle Material | Titanium | Stainless Steel | ||
| Needle Length | 0.2/0.25/0.3/0.5/0.75/1.0/1.5/2.0/2.5/3.0 MM | |||
| Usage Scenario | Home use / Clinical use / Physician use | |||
| Function | Scar Removal | Hair Restoration | Cellulite Treatment | Anti Ageing / Wrinkle |
| Hyper Pigmentation Treatment | Stretch Mark Removal | |||
Instructions
1. Wash your hands and the area to be treated thoroughly.
2. Wipe the skin and your hands with anti-bacterial gel (you can
skip this step if you are using needle lengths of less than 0.5mm).
3. If you are using numbing cream, follow the manufacturer's
instructions for use. Always remove the cream completely before
rolling (you can use cotton pads soaked with alcohol to do this).
4. Rinse the derma roller under hot running water for a few
seconds.
5. Apply skin care product, if using.
6. Whilst pulling the skin taut with your free hand, roll forwards
and backwards over the area to be treated. Roll 8-10 times in each
direction: vertically, horizontally and diagonally (forwards and
back equals two rolls). Apply sufficient pressure for the needles
to penetrate the skin to their full length. Lift the derma roller
slightly after each roll - this will ensure that the needles create
new micro-channels in the skin rather than going over the same ones
repeatedly.
7. Wash treated area and dry with a clean towel or air-dry.
8. Apply skin care product, if using.
Caution
1. Do not share with others.
2. Sterilize derma head before and after each use and store in the
supplier packaging for maximum hygiene.
3. Keep out of reach of children.
4. Avoid using if skin has: active acne, psoriasis, infections, and
other abnormal skin conditions.
5. Avoid using on eyelids.
6. Discontinue use and consult with a physician if irritation or
rashes appear.
7. Do not treat skin more than once a day if using 0.25 mm, and no
more than once a week if using 2.5mm roller.
Directions for use
1. Disinfect derma roller with Isopropyl alcohol before and after
each use.
2. Cleanse the skin with an antimicrobial cleanser and pat dry
before treatment.
3. Using moderate pressure, roll the device over skin back and
forth 4-8 times vertically, diagonally, and horizontally.
4. Optional: Use vitamin c serum over treated area for maximum
results.
5. Dispose and replace with a new derma roller after about 15 uses.
Quality Control
My quality control will conduct quality inspections from the procurement of materials, production and packaging of products to ensure that the products are in the best condition before shipment.
Product Detail
We pay great attention to the details of the product, because a little bit of product details will affect the user's use, we hope to bring the best user experience to the customer.
Design
Our product design is based on the premise of improving the user experience, looking for the best balance with the versatility of the product.
This is one of the most important reasons why our products can be recognized.
