Active Member
|
[China]
Address: Room 302, No.150 Dujuan Road, Shanghai, China
Contact name:Ge
startec ltd |
|
|
Tripod Battary Winch Up 45KG 30M Lattice Steel Towers
SPECIFICATIONS
Stability Stable on its own, no foundation required ,just need counterweight block or sandstone steel frame
Tower Height : 15m 20m 25m 30m
Antennae configuration 1×1.2m mw dishes and 6 GSM Panel antennes normally
Tower type Lattice type, fully galvanized, painted as per customer requirements
Operation Operated by 3 phase winch or single phase winch and limit switches for additional safety, Control panel and pendent switch. Optional hand wheels provided for for towers 35m or smaller.
Wind speed 120, 160 and 180 km/hr depending on the area requirement.
product introduction:
A lattice tower or truss tower is a free standing vertical framework tower.This construction is widely used in transmission towers carrying high voltage electric power lines, in radio masts and towers and in observation towers. Its advantage is good shear strength at a much lower weight than a tower of solid construction would have as well as lower wind resistance.
specification:
| Height/m | 3 | 6 | 9 | 12 | 15 | 18 | 20 | 25 | 30 |
| sections | 2 | 4 | 5 | 7 | 8 | 10 | 10 | 10 | 11 |
| Closed/m | 1.5 | 1.6 | 1.9 | 1.8 | 2 | 1.9 | 2.1 | 2.6 | 3 |
features:
YG's aluminum /steel lattice towers are manufactured and new designed from China, in max 3 meters sections allowing effortless transport, meaning total leadtime can be measured in days - not weeks or months. As a lightweight structure the towers can be built with a small
crew and minimal plant, with smaller towers even able to be
assembled by hand. |
product photo:
product Details:
A lattice tower or truss tower is a free standing vertical framework tower.This construction is widely used in transmission towers carrying high voltage electric power lines, in radio masts and towers and in observation towers. Its advantage is good shear strength at a much lower weight than a tower of solid construction would have as well as lower wind resistance. In structural engineering the term lattice tower is used for a freestanding structure, while a lattice mast is a guyed mast supported by guy lines. A guyed cell tower, also known as a guyed mast, is typically a very tall lattice tower that depends on guy lines for stability. The tower itself has the compressive strength to support its own weight, however, it cannot support itself when faced with lateral forces such as wind loads. Typical guyed cell towers have three guy lines anchored through the landlord’s property, however, depending on the height they can have more. Guyed towers are typically at least 200 – 300 feet in height and can support multiple wireless tenants. |
| Height: 3m—30m |
| Material: aluminum alloy/ galvanized steel*(strengthen type) |
Both hand winch and electrical winch available. special strenthen tower available |
application areas:
| Capable of mounting a range of lighting, CCTV, sensors, and
industrial monitoring equipment, this serviceable mast is
incredibly popular in mining and construction where climbing
structures can present a safety concern, eliminating the need for
an elevated work platform or a certified tower rescue team to
perform even simple adjustments. This mast is also ideal for
combination with wind turbines, providing high elevation with
maximum stability allowing the establishment of temporary power
generation at your exploration site, construction office, or
hardstand. Headframes are available to support a range of wind turbines, radars, camera systems, and telecommunications configurations |
Accessories:
Packing, delivery tiem, and shipping:
We will close then pack the goods safely in solid wooden box.
Prodcution lead time for sample: 2 weeks; 4 weeks for bulk order
Ship by sea, air, or express according to your request.
