|
[China]
Trade Verify
Address: Building 5, TEDA Raycom Park, No.12 Zhu Yuan Road, Tianzhu Free Trade Zone Shunyi, 101312, Beijing, China
Contact name:Hu
SINO AGE DEVELOPMENT TECHNOLOGY, LTD. |
|
Verified Suppliers
|
|
|
HARTIP2000 is an innovative portable Leeb hardness tester with our new patent technology, which makes HARTIP 2000 a universal angle (UA) impact direction hardness tester.
It is no need to set up impact direction when taking measurement by any angle. Therefore, HARTIP 2000 offers a linear accuracy comparing to the angle compensating method.
HARTIP 2000 is also a cost saving hardness tester and has many
other features.
•Universal angle impact direction
•No need to setup impact direction
•No compensation for impact direction
•Linear accuracy for any angles
•High accuracy: +/-2HL( or 0.3% @HL800)
•Big digital LCD display with backlight
•Ten testing materials including forged steel
•It has strength conversion value
•RS232 interface to micro-printer directly
•300 data for memory and re-read
•Customer re-calibration allowed
•Power on/off automatically
Specifications:
| SADT HARTIP 2000 hardness tester | |
|---|---|
| Principle | Leeb hardness measurement |
| Accuracy | ±0.3% @ HL=800, Repeatability: ±2HL |
| Display | Digital LCD with backlight |
| Hardness scale | HL/HRC/HRB/HB/HV/HS/σb |
| Measuring range | HL170-960/ HRC17-70/ HRB13-109/ HB20-655/ HV80-940 / HS32-99.5 / σb(rm)255-2639N/mm² |
| Impact device | DU, DL, D+15, G, C (optional) |
| Impact direction | Universal angle (UA) type |
| Materials | 10 common metal materials |
| Memory | 300 data can be stored and re-readable |
| Statistics | Calculated automatically |
| Re-calibration | Allowed by user |
| Indicator | Low battery |
| Communication interface | RS232 to micro-printer Bluetooth (optional) to bluetooth micro-printer |
| Auto power off | Auto |
| Power supply | 1.5V AA alkaline battery x 2 |
| Working environment | -10~+45ºC |
| Dimension (mm) | 127x66x29 |
| Net weight (g) | 240 |
| Standards | Conforming to ASTM A956, DIN 50156, GB/T 17394-1998 |
| Type | Brief description | |
| D | Universal standard unit for majority of hardness testing assignments. | |
| DC | Extremely short impact device, other specs identical with type D. | |
| Application: | - highly confined spaces | |
| - holes and cylinders | ||
| - internal measurements on assembled machines | ||
| D+15 | Slim front section | |
| Application: | - grooves and recessed surfaces. | |
| DL | Extremely slim front section | |
| Application: | - extremely confined spaces | |
| - base of grooves | ||
| C | Reduced impact energy ( compared with type D). | |
| Application: | - surface hardened components, coatings | |
| - minimum layer thickness: 0.2mm. | ||
| - thin walled or impact sensitive components (small measuring indentation). | ||
| E | Synthetic diamond test tip (approx.5000 HV). | |
| Application: | - extremely high hardness measurement such as high carbon steel up to 1200 HV | |
| G | Increased impact energy(approx. 9 times that of type D) | |
| Application: | - Brinell hardness range only | |
| - heavy cast and forged parts with lower demands on surface finish. | ||
