|
[China]
Trade Verify
Address: R202, 2F, No.1 block, WeiTai Industrial Park, No.1 WeiTai Rd, Shiyan, Bo'an, Shenzhen, P.R.China, 518101
Contact name:Hung Sam
Hung-Kee (China) Electronic Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Neonate patient monitor ICU cardiac monitor portable patient
monitor modular patient monitor vital sign monitor
12.1" portable high acuity neonate Multi-parameter Patient Monitor
neonatal monitoring cardiac monitor HighAcuity N12
Neonate Patient Monitor Quick Details:
1. 12.1 inch TFT LCD screen,portable neonatal monitor, 6 standard
parameters
2. 32-levels sound volume adjustment
3. 10-levels brightness adjustment
4. Maximum 168 hours graphic and tabular trends of all parameters;
5. ST Segment/Arrhythmia Analysis, Tabular Trending/Graphical
Trending, Drug Calculations, OXY CRG
6. Maximum 20 hours continual working time (optional)
7. Touch screen (optional)
8. Masimo SPO2 module (optional)
9. EtCO2 module (optional)
10. 2IPB module (optional)
11. CO module (optional)
Hung-Kee Patient monitor Brochure 2022.01.pdf
Neonate Patient Monitor Technical details:
Table EtCO2 Specification
| Transducer Type | Sidestream CO2 Sensor |
| Sampling Rate | 50 mL/minute ± 10 mL/minute |
| Principle of Operation | Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts in optics |
| Initialization Time | Capnogram displayed in less than 5 seconds at ambient temperature (e.g., 25°C); full specifications within 1 minute |
CO2 Measurement | Selectable at |
| CO2 Resolution | 0.1mmHg, at 0 to 49 mm Hg |
CO2 Accuracy | ±2 mm Hg at 0 ~ 40 mm Hg |
| CO2 Stability | Drift over 4 hours shall not exceed 1 mm Hg max. |
| CO2 Noise | RMS noise of the sensor shall be less than or equal to 0.25 |
| Sample line | Single patient use sample line and inline drier line which |
| Flow Control | Via Delta P measurement across a capillary tube |
| Scavenging Port | Yes |
| Voltage Requirements | 5.0 VDC ± 5% |
| Interconnection | Standard Lemo Redel 8-pin plastic |
Temperature and | Operating: 5º to 55ºC, 10 to 90% RH, non-condensing |
| Data Interface | RS232, bi-directional, 19200 baud. Standard N-8-1 |
| Data Output | CO2 gas concentration (mm Hg), End-tidal CO2, Inspired CO2, |
( for more detailed technical data please refer to above PDF
brochure)
Neonate Patient Monitor Description:
The HighAcuity N12 neonate patient monitor is part of Hung-Kee’s
premier patient monitoring solution designed to enhance patient
care and support timely and accurate clinical assessment across
Emergency, Critical Care, and Operating Room environments in child
or neonatal hospitals. The HighAcuity N12 neonate patient monitor
offers an optional plug-and-play module structure for more advanced
monitoring functions such as EtCO2, aiding clinicians to identify signs of patient deterioration due
to respiratory distress, and other options like 2-ch IBP, C.O.,
Suntech BP and Masimo SPO2 modules. Integrated in each HighAcuity
N12monitor, 3leads ECG, SpO2, NIBP, respiration, and temperature, offering a robust parameter
platform to meet the needs of the ambulatory surgical care
environment.
1. New high-precision cardiac patient monitor
2. 12.1" color TFT display, up to 7 waveforms
3. Various interfaces: A single guide, standard, large font, all
leads
4. Anti-ESU, anti- defibrillator
5. Thinner and lighter in design, convenient and portable for users
6. Real-time S-T segment analysis, pacemaker detection
Neonate Patient Monitor Standard Accessories:
3-lead ECG cable, SPO2 sensor, BP cuff, Temperature probe, Lithium
battery, User manual, Power cord
Neonate Patient Monitor Optional Accessories:
Aluminum trolley, wall mount stand
FAQ for neonate patient monitor:
1.Q: How long is the warranty time?
A: 24 Months
2. Q: Can the accessories be exchanged around Hung-Kee devices?
A: Yes, it is possible to use the same accessories to exchange
Hung-kee devices among the same series.
3. Q: When do you delivery?
A: Usually in 7-30 days depends on the order qty and available of
some specific parts.
4.Q: Do you work on OEM and SKD project?
A: Yes, we have more than 14 years experience on OEM and SKD
service, full assembling procedure will be provided, and detailed
guidance of local assembling work will be offered.
5.Q: Where is your company located?
A: Our company is located in Shenzhen city, very near from
Hongkong(about one and half hours)
6. Q: Can I order a sample?
A: Sure, delivery sample by global express in charge.
7. Q: How to proceed an order for portable patient monitor or other
medical equipment?
A: 1st let us know your requirements or application.
2nd We quote according to your requirements or our suggestions.
3rd customer arrange payment for formal order.
4th We arrange the production.
8.Q:Are You A Manufacturer Or Trading Company?
A: We Are The Top 10 Manufacturer of ICU Equipment in China Since
2008.
9.Q:Do You Need Foreign Agent?
A: Surely Yes, We Warmly Welcome Foreign Clients To Be our Agent.
10.Q:How Can We Guarantee Quality?
A: Each Production Step Has Two Times Inspection, Engineers
Simulating Actual Operation Of Each Machine Before Shipping.
11.Q:Why Should We Buy From You Rather than from other suppliers?
A: Producing Stable Quality And Affordable Products Is Our Purpose!
Hung-Kee has been producing medical devices for more than 14 years,
we have rich experience in production and maintenance.
12.Q: Are you trading company or manufacturer?
A: We are factory which has over 14 years' manufacturing
experience.
13.Q: What's the MOQ?
A: 1 unit.
14.Q: How long is your delivery time?
A: 5 - 30 days after order confirmed. Based on the item and
quantity.
15.Q: What is your terms of payment?
A: T/T, Western Union or PayPal; Trade terms: CIF
16.Q: Where's your general loading port?
A: Shenzhen or Hongkong port, as your demand.
17.Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
