Round Aluminium Alloy Wire Rope End Stop 3.1 T / TKH Ferrules

MATCHING WIRE ROPE TO FERRULE
Selection of the correct ferrule is to take account of:
-The measured rope diameter
-The rope type (and core)
-The nominal fill factor, f (or metallic cross-sectional area factor, C) of the rope. Very important for fibre core ropes!
 

Case 1
For single layer round strand ropes with fibre core and cable-laid ropes having a fill factor of at least 0,36 (C≥0,283) and max 0,45 (C≤0,353), a ferrule having a size / Code number equivalent to the measured rope diameter is to be selected from the table on next page.
 

Case 2
For single layer round strand ropes with fibre core and cable laid ropes having a filling factor greater than 0,45 (C>0,353) and for single layer round strand ropes with metallic core and for rotation-resistant round strand ropes having a fill factor up to 0,62 (C≤0,487), a fer- rule having the next larger size / Code number than the measured rope diameter is to be selected from table on next page.
 

Case 3
For single layer round strand ropes with metallic core and for rotation-resistant round strand ropes and parallel-closed round strand ropes having a fill factor greater than 0,62 and up to 0,78 (0,487<C≤0,613) the ferrule is to be selected from table on next page.
 

Case 4
For spiral strand rope having a fill factor not greater than 0,78 (C≤0,613), ferrules are to be selected having two size / Code numbers larger than the actual rope diameter from table on next page. Two ferrules spaced two rope diameters apart are to be used per termination. After pressing a space is to be maintained between the ferrules.
Applicable rope types and grade
Single layer, rotation resistant and parallel-closed stranded ropes confirming to EN 12385-4, stranded ropes conforming to EN 12385-5, spiral strand ropes conforming to EN 12385- 10 and cable-laid ropes as speci

About TALURIT

 

• The company TALURIT was built-up on a patented solution for mechanical splicing of wire ropes. TALURIT have been the pioneering company in this special field, developing effective methods and equipment for mechanical splicing ever since.
  
  The company is privately owned and was established in 1948. The parent company is based in Gothenburg, Sweden with subsidiaries near Singen in southern Germany and in Barnsley, United Kingdom. They have subsidiaries in Ningbo, China and in Singapore.
• 
  TALURIT sell their products throughout the world and have representation in most industrialized countries. Stock of standard products are strategically situated around the world to cut lead times and to improve efficiency.
   
• Anfeng Lifting & Rigging is authorized non-exclusive distributor in China for TALURIT swagers, aluminum ferrules, copper ferrules, stainless steel ferrules, carbon steel ferrules and more.
   
  About Anfeng Lifting & Rigging
   
  Based in Shanghai Free Trade Zone, Shanghai Anfeng Lifting & Rigging Ltd. is an experienced technical and sales company specialized in supplying webbing slings, round slings, wire rope and slings, chains, rigging accessories and more.

   

  Anfeng supplies steel wire ropes, wire rope slings, lifting chains and accessories, webbing slings, round slings, fall protection harness, typhoon resistant series products, lashing, offshore mooring lines, chain hoists, lever hoists, electric hoists, shackles up to 1500t, and lifting points.

   

  We have earned a reputation globally as a provider of high quality products, supported by our trained staff and high standard of QA/QC procedure and inspections. Our technical staffs make sure the products meet all safety and manufacturing requirements. Upon request, Anfeng provides customers with DNV-GL, CCS, ABS and other third-party inspection certificates.