POE-S2008GFB(8FE+2GE)_8 Port 10/100Mbps IEEE802.3af/at PoE Switch with 150W Built-in power supply (Newly Developed)

POE-S2008GFB (8FE POE + 2GE Uplink, 150W Built-in Power Source, 2.2G Bandwidth, IEEE802.3af/at)

Overview:

POE-S2008GFB, is 8 ports Fast Ethernet unmanaged Power over Ethernet switch, comes with 2 ports Gigabit uplink, equipped with 150W built-in power supply source and conforming to IEEE802.3af and IEEE802.3at, which all together allows it supply maximum 30W power for every single port at PoE Ethernet output end, all these power transmits through pins 1,2.4,5 (+) and pins 3,6,7,8(-) over Ethernet cable and require cat5 least or higher quality ones, which will ensure the least power lost in the transmission.

There are two different alternative power supplying modes for this PoE switch which including AC100-240V and DC 48-57V, it brings high flexibility on the power input. It also comes with rack mounting kits that allows it easy to be installed on rack or cabinet. Finally, PoE-S2008GFB, as a power source equipment is applicable primarily to IP CCTV camera, Voice over Internet Protocol phone, Wireless Access Point, Portable device, Access Control or other PoE compatible Powered Device (PD).

Key Features

• 8 Port 10/100Mbps POE + 2 Port Gigabit RJ45 uplink.
• Compliance with IEEE802.3af/at.
• AC100-240V, 50/60Hz or DC 48~57V two different input modes.
• Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure.
• Auto MDI/MDIX, Store-and-forward, 2G bandwidth.
• MAX 30W for every single port, total external input power amount 150W.
• Supports wire speed switch and jumbo frame up to 9KB transmission for all ports.
• Plug and play, self-adaption, lightning protection, 19’’ rack mountable.
• PoE working status can be read and analyzed through LED indicators on front panel.
• Applied to CCTV IP camera, Wireless AP, VoIP phone, etc.

Specification

Application Diagram