|
[China]
Trade Verify
Address: Zhuangtou new village ,tongji office Jimo of Qingdao,Shandong province,PR China
Contact name:Windy Wang
Qingdao Xincheng Rubber Products Co., Ltd. |
|
Verified Suppliers
|
|
|
1.8X18m Lifting Marine Inflatable High Strength Rubber Airbag,ship launching airbag
Introduction
Marine airbags are designed using principle of rolling wood. "XINCHENG" marine rubber airbags choose the whole intertwine technology to make rubber airbags on the structure more reasonable, has higher safety coefficient and bearing capacity. Size : D0.5 m x L6.0 m ~ D 2.5 x L25m. "XINCHENG" rubber airbags are produced in strict accordance with the ISO17357-2002 and GB/T 2002-2002 international quality standard, our products have exported to all over the world.
Features
● Different airbag size stock available, quick delivery
● Provide repair kit and on site instruction
● Long time service life can be reused many times
● Wear resistance and anti aging
● Good raw material and cord fabric
● Do no harm to the environment. Time & money saving
● Need no more than air compressors, winches and ropes
● Marine airbags are much cheaper and portable than other methods
Technical Strengths:
1. Higher content Natural Rubber materials, 56%. Higher content natural rubber prove to be superior quality.
2. Gas Tightness. We design to secure the Pressure Decrease is not exceeding 5% around approximately 72 hours
3. Configuration of Airbag Layers. Layers should mean corresponding synthetic tyre cord layers and additional rubber layers combination to secure longer lifespan.
4. Breaking force of Synthetic-Tyre-Cord. Every strand is over 31kgs breaking force to reinforce the tensile strength.
Application
● For ship upgrading, conversion or new/repair launching (Ship launching airbags)
● Marine airbag for salvaging sunken ship or heavy immersed steel structure
● For hoisting and transporting heavy goods up to 10,000 tons structure on land
● For floating use purpose as improve the draft.
● Pneumatic rubber core for architecture engineering Container for storing and transporting gas and corrosive chemical liquid and pure water for voyage
● Rubber bag for ship ballast
● Rubber airbags used for culvert making.
| o. | Test Item | Required value | Test Method | |
| 1 | Tensile strength (MPa) | >=18 | ISO37 | |
| 2 | Elongation at break (%) | >=400 | ISO37 | |
| 3 | Hardness,º (Shore A) | 60±10 | ISO7619-1 | |
| 4 | Tear strength (N/cm) | >=400 | ISO34-1 | |
| 5 | Compression set,% (70ºC±1ºC,22h) | ≤30 | ISO815-1 | |
| 6 | After thermal aging at 70ºC±1ºC,96h | Holding of pull lengthening,% | >=80 | ISO188 |
| 7 | Holding of elongation at break,% | >=80 | ISO188 | |
| 8 | Change of hardness,º(Shore A) | ≤8 | ISO7619-1 | |
| 9 | Static ozone aging at 40ºC×96h [ozone concentration (50±5)×10-8],extension 20% | No Crack | ISO1431-1 | |
