Qingdao Jiexing Marine Equipment Co., Ltd. Qingdao Beierte Marine Technology Co., Ltd |
|
Rope Net Sling Type Inflatable Rubber Fender Is Light And Flexible
Inflatable rubber fender features:
1, large energy absorption, small reaction force, so as to ensure that neither damage the hull nor damage the shore wall.
2, simple installation, portable, in any ship, any sea area is not affected by the tide and the size of the ship.
3. Good resilience, the product will not be deformed due to the force after the force is exerted. After the fender is squeezed, more than 95% of the product will be released immediately after the force.
4, good economic performance, compared with the fender, Belter ship fender economic performance is good, cost-effective, reliable quality. Beierte Fender has undergone inspection from raw material purchasing, product ordering, product production and product inspection to ensure its quality.
80KPa inflatable rubber fender commonly used dimensions performance table
SIZE | Initial pressure is 80 kPa Compression deformation 60% | ||
Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
500 | 1000 | 87 | 9 |
600 | 1000 | 100 | 10 |
700 | 1500 | 182 | 28 |
1000 | 1500 | 241 | 40 |
1000 | 2000 | 340 | 54 |
1200 | 2000 | 392 | 69 |
1350 | 2500 | 563 | 100 |
1500 | 3000 | 763 | 174 |
1700 | 3000 | 842 | 192 |
2000 | 3500 | 1152 | 334 |
2000 | 4000 | 1591 | 386 |
2500 | 4000 | 1817 | 700 |
2500 | 5500 | 2655 | 882 |
3000 | 5000 | 2715 | 1080 |
3000 | 6000 | 3107 | 1311 |
3300 | 4500 | 2478 | 1642 |
3300 | 6000 | 3654 | 2340 |
3300 | 6500 | 3963 | 2534 |
The selection of inflatable rubber fender should be noted:
1. First, dock according to the tonnage, ship type and working environment of the ship;
2, the choice of pneumatic rubber fender should also take into account the ship lifting derrick tonnage, the maximum arm length; Because of the pneumatic rubber fender,
The weight and diameter of the derrick should not be higher than the tonnage and maximum boom length of the ship.
3. Pneumatic rubber fender is divided into jacket-type and portable, depending on what kind of ship's operating environment is suitable for the ship's fender.
4. According to the different diameter of pneumatic rubber fender, the number of cord layers selected is also different.
Introduction to inflatable fenders
The inflatable rubber fender is a kind of ship supplies for berth cushioning and protection. The yokohama pneumatic fender is more practical and economical than the general ship fender, so it is very popular.
Yokohama fenders is a rubber airtight container made of gluon cloth as skeleton material. Fender is filled with compressed air and can float on the water. It serves as an important buffer medium between ship and ship berthing and between ship and dock. At the same time, inflatable rubber fender can absorb the impact energy of ship movement, reduce the ship's recoil force, and greatly improve the safety of ship docking. With air as the medium, the compressed air is used to absorb the impact energy, so that the ship is flexible when docking, so as to achieve the effect of collision prevention and avoidance. Yokohama fender has been widely used in oil tankers, container ships, engineering ships, ocean-going fishing boats, offshore platforms, large docks, military ports, large bridge piers and other ships and offshore platforms.
Compression test for inflatable rubber fender
Inflatable rubber fender product picture
Service tenet:
Integrity management, quality first; Create a world famous brand, do a hundred years of enterprise;
Rigorous and pragmatic, considerate; Serve every user attentively.
After-sales service:
1. All products of the company are produced in strict accordance with ISO17357:2014 standards.
2, the company's products in normal use, the life of 8-10 years.
3, the company will carry out strict inspection on each product before leaving the factory, to ensure that all products without any quality problems before leaving the factory, so that every user can rest assured with.
4, the company's product quality warranty period of 2 years, quality problems occurred during the warranty period free repair or replacement.
5. Responsible for guiding repair and maintenance process, and long-term supply of repair materials and tools.
6. Instruct or participate in the implementation and application of products to various projects.
7. Provide pre-sale, in-sale and after-sale services