Qingdao Jiexing Marine Equipment Co., Ltd. Qingdao Beierte Marine Technology Co., Ltd |
|
Yokohama Fenders Is Customizable With Inflatable Rubber Fender
The selection of inflatable rubber fender should be noted:
1. First, dock according to the tonnage, ship type and working environment of the ship;
2, the choice of pneumatic rubber fender should also take into account the ship lifting derrick tonnage, the maximum arm length; Because the weight and diameter of the pneumatic rubber fender cannot be higher than the tonnage of the ship's derrick and the maximum boom length.
3. Pneumatic rubber fender is divided into jacket-type and portable, depending on what kind of ship's operating environment is suitable for the ship's fender.
4. According to the different diameter of pneumatic rubber fender, the number of cord layers selected is also different.
Common dimensions and performance data for pneumatic rubber fender
SIZE | Initial pressure is 80 kPa Compression deformation 60% | ||
Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
500 | 1000 | 87 | 9 |
600 | 1000 | 100 | 10 |
700 | 1500 | 182 | 28 |
1000 | 1500 | 241 | 40 |
1000 | 2000 | 340 | 54 |
1200 | 2000 | 392 | 69 |
1350 | 2500 | 563 | 100 |
1500 | 3000 | 763 | 174 |
1700 | 3000 | 842 | 192 |
2000 | 3500 | 1152 | 334 |
2000 | 4000 | 1591 | 386 |
2500 | 4000 | 1817 | 700 |
2500 | 5500 | 2655 | 882 |
3000 | 5000 | 2715 | 1080 |
3000 | 6000 | 3107 | 1311 |
3300 | 4500 | 2478 | 1642 |
3300 | 6000 | 3654 | 2340 |
3300 | 6500 | 3963 | 2534 |
There are two types of inflatable rubber fenders
1, sheath type
The sheath type yokohama fenders is covered with a sheath consisting of a chain, or a nylon rope net, and old tires (or rubber sleeves). The longitudinal break point of the chain or nylon rope net is connected with one or two mesh holes of the adjacent mesh set with a cable or pull rope. The mesh set will be attached with a tire or rubber sleeve to provide protection for the fender body.
2. No sheath type
Fender without sheath type inflatable rubber fender is the fender without net tire chain coverage outside the surface. This kind of fender is light and easy to move, and makes the fender move more flexibly in the work, so as to deal with the impact from various angles.
Pneumatic rubber fender features:
1, large energy absorption, small reaction force, so as to ensure that neither damage the hull nor damage the shore wall.
2, simple installation, portable, in any ship, any sea area is not affected by the tide and the size of the ship.
3. Good resilience, the product will not be deformed due to the force after the force is exerted. After the fender is squeezed, more than 95% of the product will be released immediately after the force.
4, good economic performance, compared with the fender, Beierte Marine fenders economic performance is good, cost-effective, reliable quality. Beierte pneumatic fender from raw materials procurement, product order, product production, product inspection and delivery through layers of inspection to ensure its quality.
Schematic diagram of inflatable rubber fender
Air - filled rubber fender pressure test
Display of inflatable rubber fender products
Service tenet:
Integrity management, quality first; Create a world famous brand, do a hundred years of enterprise;
Rigorous and pragmatic, considerate; Serve every user attentively.
After-sales service:
1. All products of the company are produced in strict accordance with ISO17357:2014 standards.
2, the company's products in normal use, the life of 8-10 years.
3, the company will carry out strict inspection on each product before leaving the factory, to ensure that all products without any quality problems before leaving the factory, so that every user can rest assured with.
4, the company's product quality warranty period of 2 years, quality problems occurred during the warranty period free repair or replacement.
5. Responsible for guiding repair and maintenance process, and long-term supply of repair materials and tools.
6. Instruct or participate in the implementation and application of products to various projects.
7. Provide pre-sale, in-sale and after-sale services