Eco Friendly Pneumatic Diaphragm Pump With Good Self Priming Performance

Eco Friendly Pneumatic Diaphragm Pump With Good Self Priming Performance
 

Pneumatic Diaphragm Pump Introduction

Pneumatic Diaphragm Pump are machines for conveying or pressurizing fluids. The pump is mainly used to transport water, oil, acid and alkali liquid, emulsion, suspending emulsion and liquid metal, and also can transport liquid, gas mixture and liquid containing suspended solids. Pumps can generally be divided into three types according to their working principles: volumetric pumps, power pumps and other types of pumps. According to the driving method, it can be divided into electric pump and water wheel pump, single-stage pump and multi-stage pump according to the structure, boiler feed pump and metering pump according to the use, and water pump, oil pump and mud pump according to the nature of liquid delivery. According to the shaft structure, it can be divided into linear pump and traditional pump. Pumps can only transport fluid as the medium of logistics, not solid.

 
 
Pneumatic Diaphragm Pump Specifications
 
Air Diaphragm Pump
1. Non leakage
2. Good self priming performance
3. Convey all kinds of medium
4. Material:Cast steel,Alu,SS,PP
 

Pneumatic Diaphragm Pump Application
1, Poisonous, combustible and volatilizable liquids.
2, Strong acid, strong alkali liquids with corrosion
3, Tanker truck, bilk plant, load and unload of oil products
4, Pickle, fruit pulp, mashed potatoes, chocolates, etc
5, Paint, rubber, pigment and adhesives
6, Various ceramic pulp, grouting, mortar and slurry
7, Various latex, organic solvents, stuffing
8, Stripping of oil carrier (pump dirty water and residual oil)
9, Common hop, thin paste of yeast power, syrup and molasses
10, Special liquid
 
A 06X X - X X X - X   (model selection)
 
Form of pipe mouth:A-BSP B-NPT(F) C-Flange  
Diaphragm material:9 – Santoprene H – Hytrel   T - PTFE/Santoprene  
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal  
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel  
Pump material: SS –Stainless Steel AL –Aluminum Alloy   CI- Carbon Steel P/K –Polypropylene/Kynoar
 

Maximum Applied Temperature Limits (diaphragm / ball / seal material)  
 
 
Acetal ···············································40°-         150°F        (4.4- 65.5°C)  
Santoprene·········································-40°- 225°F (-40°- 107.2°C)   ·················································40°- 220°F (4.4°- 104°C)   Nitrile··················································10°- 180°F (-12°- 82°C)   Viton····················································-40°- 350°F (-40°-176.6°C)   Hytrel····················································-20°-150°F (-12°- 93°C)   Kynar····················································10°-200°F (-28.9°- 65.5°C)   Polypropylene·········································32°- 175°F (0-79.4°C)