|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
Plug-In Tee Brass Pneumatic Push In Fittings 4mm 6mm 8mm 10mm 12mm
Pneumatic fittings are used to connect lengths of tubing, pipes and hose in pressurised pneumatic systems. They typically have tighter seals and lower pressure requirements compared to hydraulic fittings and can be commonly found in robotics within production lines as well as products we use within our daily lives such as vacuums and tyre pressure gauges.
Pneumatic fittings are predominantly made from three different types of material; plastic, stainless steel and polymer. Stainless steel and polymer fittings are used in the food and beverage industry to comply with hygiene regulations, but all three types can be used in any other application.
Technical data of Pneumatic Hose Fittings:
Specifications of Plug-In Tee Brass Pneumatic Hose Fittings:
Model No | D | L1 | L | L' | G |
BCKH-3T-2.5-G | 4 | 26 | 23 | 34 | φ4 |
23 | 35 | φ6 | |||
24 | 36 | φ8 | |||
25 | 37 | φ10 | |||
BCKH-3T-4-G | 6 | 22 | 25 | 36 | φ4 |
23 | 35 | φ6 | |||
24 | 36 | φ8 | |||
25 | 37 | φ10 | |||
BCKH-3T-6-G | 8 | 22 | 27 | 34 | φ4 |
23 | 35 | φ6 | |||
24 | 36 | φ8 | |||
25 | 37 | φ10 | |||
25 | 37 | φ12 | |||
BCKH-3T-8-G | 10 | 22 | 30 | 35 | φ4 |
23 | 36 | φ6 | |||
24 | 37 | φ8 | |||
25 | 38 | φ10 | |||
25 | 38 | φ12 | |||
BCKH-3T-10-G | 12 | 22 | 32 | 36 | φ4 |
23 | 37 | φ6 | |||
24 | 38 | φ8 | |||
25 | 39 | φ10 | |||
25 | 39 | φ12 |
Product Video of BRANDO Brass Pneumatic Hose Fittings:
List of All Push To Connect Brass Pneumatic Hose Fittings:
Choosing the Right Fittings for Your Pneumatic System:
Fittings help control the force and directional flow of compressed
gas or air used in pneumatic systems. One of the first
considerations in choosing a connector is the type of vessel that
you will be connecting to such as the flexibility of the hose or
tube, as well as the inner diameter (ID) and outer diameter (OD) of
the vessel to ensure an adequate seal and secure connection.
Fitting material choice for your pneumatic connector is also
important, including gas compatibility or resistance to heat or
corrosion.
Other considerations in choosing the right pneumatic system
connector include:
1. Type of connection and the function it performs
2. Operational pressure of the pneumatic system
3. Operating temperature range
4. P.S.I. requirements for your application
5. Amount of vibration produced by the pneumatic system
6. Thread type of the receiving fitting
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
