|
[China]
Trade Verify
Contact name:Judy.Zhao
Veson Valve Ltd. |
|
Verified Suppliers
|
|
|
NAUMR Standard Double Acting Rack and Pinion Pneumatic Actuator
► Specifications of Pneumatic Actuator
1. Die-cast aluminum (ASTM6005) body, can be treated with anodized, epoxy, PTFE or Nickel plated. Inner surface fine grinding process, both internal and external use advanced anticorrosion technology, cylinder friction coefficient is small, long service life.
2. Die-cast aluminum end caps can also be treated with PTFE, Nickel plated.
3. Nickel plated alloy steel or stainless steel output shaft.
4. Rack & pinion design, symmetrical installation position,
easy to change the output shaft steering, quick action.
5. Antifriction sliding bearings.
6. Stainless steel fasteners.
7. Fully in line with international standards: NAMUR, ISO5211, DIN3337.
8. Rotation angle : 90° ± 5°. Pneumatic actuators of different stroke can be customized as required (e.g. 120°, 135°, 180° etc.)
| Model | EX1 mm | EX2 mm | Od/mm | 15 | 2 | O Ring (Piston) |
| VS-052 | 1M6×25 | M6×20 | ∮15 | 16 | min.5/ max.12 | Spring (Cartridge) |
| VS-063 | M6×25 | M6×20 | ∮18 | 17 | 1 | Spring (Cartridge) |
| VS-075 | M8×30 | M6×25 | ∮20 | 18 | 1 | Spring Clip (Pinion) |
| VS-083 | M10×35 | M6×25 | ∮20 | 19 | 1 | Position Indicator |
| VS-092 | M10×40 | M8×30 | ∮25 | 20 | 1 | O Ring (Pinion botton) |
| VS-105 | M12×40 | M8×30 | ∮25 | 21 | 1 | O Ring (Pinion top) |
| VS-125 | M12×45 | M10×35 | ∮35 | 30 | 1 | End Cap (Right) |
| VS-140 | M14×55 | M10×40 | ∮40 | 31 | 1 | End Cap (Left) |
| VS-160 | M16×55 | M10×45 | ∮45 | 39 | 1 | Cap Screw (Indicator) |
| VS-190 | M16×65 | M12×55 | ∮50 | 40 | 2 | Piston |
| VS-210 | M16×70 | M14×60 | ∮55 | 41 | 1 | Actuator Identification Label |
| VS-240 | M16×80 | M16×65 | ∮55 | 50 | 1 | Body |
| VS-270 | M16×90 | M20×80 | ∮55 | 60 | 1 | Drive Shaft |
High-temperature Type:-20°C~+180°C
5. Rotate angle: 90°± 5°
6. Solenoid valve voltage: AC220V or DC24V , or as per customer’s request.
► Design & Construction Of AT Series Double Acting Pneumatic Actuator
1. Full conformance to the latest specification: ISO5211DIN3337VD/VDE3845and NAMUR.
2. The extruding high-intensity aluminum body possesses a honed
internal surface coated with hone anode oxygenation for long life,
low coefficient of friction and swift performance.
3. Excellent, compact and modernized construction along with
multi-specifications make the selection both economic and
beneficial.
4. All acting surfaces adopt high-quality bearings, resulting in
low friction, high cycle life, and no noise. The two independent
external travel stop adjustment bolts can easily and precisely
adjust ±5°at both open and close directions.
5. The same outline actuator has the functional modes of double
acting and spring return, and the spring return has the normal-open
and normal-close styles.
6. Multi-function position indicator with NUMER is convenient for
mounting accessories.
7. Pre-compressed load spring is convenient for safe mounting and
teardown procedures.
8. Die-casting aluminum pistons and end caps have high intensity
and lightweight.
9. Different O-rings materials are available for high and low
temperature.
10. According to different demands we can offer Multi-travel
rotations (e.g. 120°135°180°) and three position actuators.
11. Solenoid valves are easily mounted without any connecting
plank.
► Transaction Process-Pneumatic Actuator
► FAQ-Pneumatic Actuator
1. Q: Is sample order acceptable?
A: Yes, of course.
2. Q: How to place the order?
A: You can send us an email or call me directly.
3. Q: How many days for delivery?
A: Normally within 15-20 days according to order quantity.
4. Q: How to make the payment?
A: We only accept T/T.
5. Q: How will you make the shipment?
A: By sea, air or express service.
