|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
YIKANG AUTOMATION |
|
Verified Suppliers
|
|
|
| Standard Specifications | ||||||||
| Model | AR425 | AR435 | AR625 | AR635 | AR825 | AR835 | AR925 | AR935 |
| Port size | 1/4, 3/8, 1/2 | 3/4, 1 | 1 1 4, 11 2 | 2 | ||||
| Fluid | Air | |||||||
| Proof pressure | 1.5 MPa | |||||||
| Max. operating pressure | 1.0 MPa | |||||||
| Set pressure range (MPa) (1) | 0.05 to 0.83 | 0.02 to 0.2 | 0.05 to 0.83 | 0.02 to 0.2 | 0.05 to 0.83 | 0.02 to 0.2 | 0.05 to 0.83 | 0.02 to 0.2 |
| Air consumption (for bleed hole) (2) | 5 L/min (ANR) (at maximum pressure) | |||||||
| Pressure gauge port size | 1 4 | |||||||
| Ambient and fluid temperature | –5 to 60°C (No freezing) | |||||||
| Construction | Internal pilot relieving type (Pilot air is always bleeding.) | |||||||
| Weight (kg) | 0.7 | 1.1 | 2.5 | 4.5 | ||||
| Note 1) Outlet pressure range: P2 is 90% of P1 or less. Note 2) Air consumption differs depending on the set pressure. Due to the construction, the pressure gap between inlet and outlet cannot be set within 0.03 MPa, even if the knob is set at the maximum. | ||||||||
| Accessory (Option)/Part No. | ||||||||
| Part no. | ||||||||
| Description Model | AR4 5 | AR6 5 | AR8 5 | AR9 5 | ||||
| Bracket | B24P | B25P | ||||||
| Pressure gauge with limit indicator Note 1) | G46-10-02 (Max. 1.0 MPa), G46-2-02 (Max. 0.2 MPa) | |||||||
| Note 1) • In the gauge part no. (e.g. G46-10-02), indicate kind
of the connecting thread. Put nothing
for Rc and “N” for NPT thread. • Please consult with SMC for NPT pressure gauge. Note 2) Use caution not to tighten excessively when mounting a pressure gauge, otherwise it may Result in a breakdown. Use a sealant tape for sealing. | ||||||||
Warning
1.Install the valve guide (on the opposite side of the knob) 60 mm
away from the ground surface to facilitate maintenance inspection.
2.Do not use the regulator with flow ex-ceeding the Max.flow
indicated in“"Flow Rate Characteristics" as this can cause failure
in pressure adjustment.
Caution
1.Release the lock to adjust the pressure.
After the adjustment, engage the lock.Failure to observe this
procedure could damage the knob or cause the outlet pressure to
fluctuate.
<Lock operating method> Loosen the knob locking screw to
un-lock it, and tighten it to lock it.
2.Please contact US if this product is to be used between solenoid
valve andactuator.
FAQ
Q: Where is your factory ? Can we visit your factory?
A:Our factory is located in Ningbo City, Zhejiang Province,China,
17kms away from Ningbo Airport. We sincerely welcome customers to
visit our company and factory.
Q: Could you add our logo on your products?
A: Yes,if your quantity more than 50pcs. we could add your logo on
the products.
Q: How long is your delivery time?
A: Generally it is 1-2 days if the goods are in stock. or it will
be 3-5 weeks if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ?
A: Yes, we could offer the sample for free charge, but do not pay
the cost of express freight.
Q: What is your payment term and payment way?
A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30%
T/T in advance ,balance before shippment. Payment ways are : T/T,
Western Union, Paypal, Alipay.
Q.What’s the shipping way?
A: For small packages, we will choose the door to door express, we
cooperated with UPS,DHL,FEDEX,TNT more than 10 years,we gurantee
the shipping cost that we offer to you will be the most favorable
price among so many suppliers in China. We will send you the
tracking number once we got it.
For big orders, By Air or By Sea through your shipping forwarder is
acceptable, if you don't have forwarder in China, we will find the
most cost-effective one for you.
If you have any other question, welcome contact us as below:
Whatsapp/Botim: 0086-15257858856 Skype: lovelyzlf@hotmail.com
Email:airwolf@flyautomatic.com
Phone/Wechat: 0086-18957877902
After-sales clause:
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those
damages coursed by shipping or Man-made damaged ). A 15% restocking
fee is
assessed for any products returned in "used" condition. And then we
will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don't plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get
your email.
