YIKANG AUTOMATION |
Verified Suppliers
|
|
1. Before installing, be sure the valve hasn't been damaged via transportation.
2. The coil must be pure vertical, the inlet and outlet on body
must be horizontal. it's
suggested to use the medium lubricated by 40μm filter element. Be
aware of the flow
direction and port size.
3. Please notice whether the installation condition accords with
technical requirements (such
as "voltage",factuation frequency", "working pressure" and "scope
of application
temperature"), then the equipment can be installed and used.
Model | 2V025-06 | 2V025-08 | 2V130-10 | 2V130-15 | 2V250-20 | 2V250-25 |
Orifice size [Note] | 2.5 | 2.5 | 13.0 | 13.0 | 25.0 | 25.0 |
Cv | 0.23 | 0.25 | 6.20 | 6.20 | 13.00 | 13.00 |
Port size | 1/8" . | 1/4" | 3/8" | 1/2" | 3/4" | 1" |
Viscosity limit | Under 20CST | |||||
Pressure range | 0~1.0MPa(0~ 145psi) | 0.05~1.0MPa(7~145psi) | ||||
Proof pressure | 1.5MPa(215psi) | |||||
Seal material | VITON | NBR | ||||
Material body | Brass with zinc plated | Brass | ||||
Activating time | 0.05 sec and below |
1. Direct acting and normally closed type 2/2 way solenoid valve.
Its high sensitivity llows it
to change direction quickly.
2. The structure is small and compact.
Only with quality can we have market, go further, and strive for the quality management concept of survival with quality.
Professional production technology management ability.
Pay attention to the process quality control, important performance
test and appearance inspection of each work station in the
production process. Check the quality level by level.
All staff participate, strengthen management, keep improving and
casting quality.
After-sales clause:
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those
damages coursed by shipping or Man-made damaged ). A 15% restocking
fee is
assessed for any products returned in "used" condition. And then we
will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don't plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get
your email.