|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
YIKANG AUTOMATION |
|
Verified Suppliers
|
|
|
SMC SY5120-5LZD-01 5/2 Way Low Power Pneumatic Solenoid Valve 0.15-0.7Mpa
Due to the flow increase, the valve size can be reduced!
1. IP67 enclosure for standardspecifications
2. The M12 waterproof connectortype ensures easy
attaching/detaching and wiring.
3. Applicable to the side, top, andbottom-ported types (4A and
2Bports)
Power consumption is reducedby the power saving circuit.Power
consumption is decreased to approx.1/3 by
reducing the wattage required to hold the valve in anenergized
state.(Effective energizing time is over 67 ms at24VDC.)
Refer to the electrical power waveform to the left.
Monitoring the output pressure of the solenoidvalve contributes to
preventive maintenance.
The output pressure of the 4(A)and 2(B) ports can be
detected.Detects errors such as incorrect switching, response
delay, backpressure interference, pressure drop, etc.
ldentifies faulty parts of actuators,solenoid valves, etc.
| Valve type | Rubber seal | Metal seal | ||
| Fluid | Air | |||
| Internal pilot operating pressure range [MPa] | 2-position single | 0.15 to 0.7 | 0.1 to 0.7 (High pressure type: 0.1 to 1) | |
| 2-position double | 0.1 to 0.7 | |||
| 3-position | 0.2 to 0.7 | |||
| 4-position dual 3-port valve | 0.15 to 0.7 | — | ||
| External pilot operating pressure range [MPa] | Operating pressure range | –100 kPa to 0.7 (4-position: –100 kPa to 0.6) | –100 kPa to 0.7 (High pressure type: –100 kPa to 1) | |
| Pilot pressure range | 2-position single | 0.25 to 0.7 | 0.1 to 0.7 (High pressure type: 0.1 to 1) | |
| 2-position double | ||||
| 3-position | ||||
| 4-position dual 3-port valve | Operating pressure + 0.1 or more (Min. 0.25) to 0.7 | — | ||
| Ambient and fluid temperatures [°C] | –10 to 50 (No freezing) | |||
| Max. operating frequency [Hz] | SY3000 SY5000 | 2-position single/double | 5 | 20*1 |
| 4-position dual 3-port valve | ||||
| 3-position | 3 | 10*1 | ||
| SY7000 | 2-position single/double | 5 | 10*1 | |
| 4-position dual 3-port valve | 3 | — | ||
| 3-position | 3 | 10*1 | ||
| Manual override | Non-locking push type | |||
| Push-turn locking slotted type | ||||
| Push-turn locking lever type | ||||
| Slide locking type | ||||
| Pilot exhaust type | Internal pilot | Main/Pilot valve common exhaust | Main/Pilot valve individual exhaust | |
| External pilot | Pilot valve individual exhaust | |||
| Lubrication | Not required | |||
| Mounting orientation*2 | Unrestricted | Single: Unrestricted Double/3-position: Main valve is horizontal. | ||
| Impact/Vibration resistance*2 [m/s2] | 150/30 | |||
| Enclosure | IP67 (Based on IEC60529)*3 | |||
| Coil rated voltage [DC] | 24, 12 V | |||
| Allowable voltage fluctuation [V] | ±10% of rated voltage*4 | |||
| Power consumption [W] | Standard | 0.35 (With indicator light: 0.4) | ||
| High pressure type, Quick response type | 0.9 (With indicator light: 0.95) | |||
| With power saving circuit | Standard: 0.1*5 (With indicator light only) [Inrush 0.4, Holding
0.1], High pressure type: 0.4*5 (With indicator light only) [Inrush 0.95, Holding 0.4] | |||
| Surge voltage suppressor | Diode (Varistor for non-polar type) | |||
| Indicator light | LED | |||
After-sales clause:
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those
damages coursed by shipping or Man-made damaged ). A 15% restocking
fee is
assessed for any products returned in "used" condition. And then we
will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don't plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get
your email.
