YIKANG AUTOMATION |
Verified Suppliers
|
|
SMC VT307-5G1-02 3 Port Pneumatic Solenoid Valve Direct Operated Poppet DC24V
Caution
Make sure that dust and/or other foreignmaterials do not enter the
valve from theunused port (e.g. exhaust
port).
This product is delivered as N.C. valve.
lf N.O. valve is required, remove mounting screws of the
requiredvalve and turn over the function plate.
(Make sure that there aregaskets on both sides of the plate.)
Then,tighten the mountingscrews to fix the valve
to the manifold base.
Warning
when mounting a valve on the manifold base,N.C. and N.O.canbe
reversed by the function plate orientation.
Also,since thecylinder operates in reverse,confirm if the function plate iscorrectly mounted or not.
1. Energy-saving type: 1.8 W
2. A single valve with various valve functions (Universal porting
type)
3. Low concentration ozone resistant
Rubber seal material: HNBR for main valve
4. Mounting dimensions are interchangeable with the existing
product.
5. Manifold type no.: VV307
Type of actuation | Direct operated type 2 position single solenoid | |||
Fluid | Air | |||
Operating pressure range | 0 to 1 MPa (High-pressure type), 0 to 0.7 MPa (Standard type) | |||
Ambient and fluid temperature | –10 to 50°C (No freezing) | |||
Response time Note 1) | 20 ms or less (at 0.5 MPa) | |||
Max. operating frequency | 10 Hz | |||
Lubrication | Not required (Use turbine oil Class 1 ISO VG32, if lubricated.) | |||
Manual override | Non-locking push type | |||
Mounting orientation | Unrestricted | |||
Impact/Vibration resistance Note 2) | 150/50 m/s2 | |||
Enclosure | Dustproof | |||
Electrical entry | Grommet, DIN terminal | |||
Coil rated voltage (V) | AC (50/60 Hz) | 100,200,110,220, | ||
DC | 24,12 | |||
Allowable voltage fluctuation | –15 to +10% of rated voltage | |||
Apparent power Note 3) Note 4) | AC | Inrush | 12.7 VA (50 Hz), 10.7 VA (60 Hz) | |
Holding | 7.6 VA (50 Hz), 5.4 VA (60 Hz) | |||
Power consumption Note 3) Note 4) | DC | Without indicator light: 4 W, With indicator light: 4.2 W | ||
Light/Surge voltage suppressor (DIN terminal type only) | AC | Varistor, LED | ||
DC | Diode, LED |
After-sales clause:
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those
damages coursed by shipping or Man-made damaged ). A 15% restocking
fee is
assessed for any products returned in "used" condition. And then we
will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don't plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get
your email.