UNID 2W Water Solenoid Valves UW-35 G1 1/4" 2/2Way AC220V Normally
Closed Conductive Brass
PRODUCT DESCRIPTION
1. UW series is direct, multiplex, connected diaphragm, conductive
and normally closed (NC)
2/2 way solenoid valve.
2. Able to be operated directly under low pressure
3. Availability of fluid type: water, air, light oil
4. Acceptable for customization Viton (130°C) , Silicone (130°C)
and EPDM (130°C)
CAUTIONS:
1. Before pipelining, the pipe line must be very clean without any
contaminants or any other
things not ought to be existed.
2. To prolong the life time of the product, Y-line filter should be
installed in the front end of
solenoid valve.
3. AC voltage tolerance:土10%; DC voltage tolerance:土1%
4. It should be installed horizontally; vertical installation is
not advisable.
Not Suitalbe For Fluid As Below:
1. Liquid status when it is high temperature; solid status when it
is cool.
2. Corrosive fluid
3. Viscosity over 20cst
MODEL | Waterproof DIN/flying lead Coil | NASS DIN Coil (IP65) | PIPE SIZE | CV | ORIFICE | FLUID TEMP | Operating Pressure kgf / cm (bar) | High Pressure Type | Dimension (mm) | Weight (kg) |
Water | Air | Light oil | Water | Air | L | H | D |
UW-10 | ● | ● | 3/8" | 4.5 | 1 5mm | -5°C ~ +80°C | 0~5 | 0~7 | 0~5 | 0.5~10 | 0.5~20 | 70 | 100 | 48 | 1.01 |
UW-15 | ● | ● | 1/2" | 4.5 | 1 5mm | -5°C ~ +80°C | 0~5 | 0~7 | 0~5 | 0.5~10 | 0.5~20 | 70 | 100 | 48 | 1 |
UW-20 | ● | ● | 3/4" | 8.6 | 20mm | -5°C ~ +80°C | 0~5 | 0~7 | 0~5 | 0.5~10 | 0.5~20 | 73 | 107 | 48 | 1.14 |
UW-25 | ● | ● | 1" | 24 | 25mm | -5°C ~ +80°C | 0~5 | 0~7 | 0~5 | 0.5~10 | 0.5~20 | 100 | 112 | 48 | 1.7 |
UW-35 | ● | ● | 1 1/4" | 12 | 35mm | -5°C ~ +80°C | 0~5 | 0~7 | 0~5 | 0.5~10 | 0.5~20 | 125 | 113 | 48 | 2.32 |
UW-40 | ● | ● | 1 1/2" | 28 | 40mm | -5°C ~ +80°C | 0~5 | 0~7 | 0~5 | 0.5~10 | 0.5~20 | 125 | 118 | 48 | 2.53 |
UW-50 | ● | ● | 2" | 48 | 50mm | -5°C ~ +80°C | 0~5 | 0~7 | 0~5 | 0.5~10 | 0.5~20 | 167 | 125 | 48 | 4.32 |
Ningbo Fly Automation Co., Ltd with its headquarter located in
Ningbo and established in 2010, is a wellknown supplier manufacture
of pneumatic equipments in the world market.
Fly Automation is specialized in producing pneumatic cylinders,
pneumatic valves,air preparation units, pulse jet valves, pneumatic
fittings, etc.
which are widely used in the lighting and textile, automotive,
machinery manufacturing, metallurgy, electronics,environmental
protection ceramics, medical equipments,food and packaging
automatic industrial fields.