|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
YIKANG AUTOMATION |
|
Verified Suppliers
|
|
|
2W160-15 1/2inch Normal Closed water Valve 2/2way Direct-acting solenoid valve
2W series small oriffice Fluid Control Valve, also known zero-pressure solenoid valve, the initial state for normally closed,normally open only available for below 3/8", thread size range from 1/8" to 3/8", Din connector type and flying leads type,anti-explosion and anti-water coil are available. With the stalbe quality and wide application, 2W valve is popular with customers, especially in the water treatment system, the 2W valve is used widely.
| 2W Series 2/2 way Direct Acting Solenoid Valve | ||||||
| Model | 2W025-06 | 2W025-08 | 2W040-10 | 2WH012-06 | 2WH012-08 | 2WH020-10 |
| Medium | Air,Water,Oil,Gas | |||||
| Operation | Direct Acting | |||||
| Type | Normal Close | |||||
| Orifice Size(mm) | 2.5 | 4 | 1.2 | 2 | ||
| CV Value | 0.23 | 0.6 | 0.05 | 0.15 | ||
| Port Size | G1/8" | G1/4" | G3/8" | G1/8" | G1/4" | G3/8" |
| Operation Fluid Viscosity | Below 23 CST | |||||
| Operating Pressure | Air,Water,Oil,Gas:0~0.7Mpa | Air,Water,Oil,Gas:0~0.2Mpa | ||||
| Max Pressure Resistance | 1.0MPa | 3.5MPa | ||||
| Operating Temperature | NBR for -5~80°C and fluororubber for -5~80°C | |||||
| Voltage Range | ±10% | |||||
| Material of Body | Stainless Steel or Brass | |||||
| Material of Oil Seal | NBR,EPDM or fluororubber
| |||||
Materials:
| PARTS | MATERIAL |
| Body | Cast Bronze/ Forge Brass/Zinc Alloy |
| Coil | Special Copper Wire (H) |
| Core | Stainless Steel |
| Tube | Stainless Steel |
| Spring | Stainless Steel |
| Plug | NBR.fluororubber .Silicon, PTFE |
| Diaphragm | NBR.fluororubber .Silicon |
RFQ
1. When your company establish?
Ningbo Fly Automation Co.,Ltd Was established in 2010, we have been
working in agrochemical field for about 26 years, we have a
professional production of process, committed to providing
customers with the most satisfactory service.
2. Are you a trader or manufacturer? Do you have factory?
We are a solenoid valve manufacturer, we have the ability of mass
production . we have our own developing and designing team, which
ensure our own technological and specific products for customers.
3. Where’s your factory located? Can we visit your factory?
Our company is in Xikou town,Fenghua city,Zhejiang Province,
China,Which is near by Ningbo city,
Customers will be always welcomed to visit our company and our
factories.Please contact us your schedule,we will arrange to pick
up you and visit our factory.
4. How do you make the quality guarantee?
We have our own quality control center, we have advanced equipments
for the inspections. We can guarantee every product will be tested
after production.
5. Can you support the specific productions?
We can design and develop the products of customer's requirement,
if you have the specific products, please send us a sample, we will
develop it for you.
6. What's the transportation service?
Usually, we will be according your address, choose the fastest and
cheapest way, the DHL,TNT,Fedex or China post express all can
support.
