2W Series 2/2 way Solenoid valve Normal Close Brass Water valve
2W025-06 2W040-10
| 2W Series 2/2 way Direct Acting Solenoid Valve |
| Model | 2W025-06 | 2W025-08 | 2W040-10 | 2WH012-06 | 2WH012-08 | 2WH020-10 |
| Medium | Air,Water,Oil,Gas |
| Operation | Direct Acting |
| Type | Normal Close |
| Orifice Size(mm) | 2.5 | 4 | 1.2 | 2 |
| CV Value | 0.23 | 0.6 | 0.05 | 0.15 |
| Port Size | G1/8" | G1/4" | G3/8" | G1/8" | G1/4" | G3/8" |
| Operation Fluid Viscosity | Below 23 CST |
| Operating Pressure | Air,Water,Oil,Gas:0~0.7Mpa | Air,Water,Oil,Gas:0~0.2Mpa |
| Max Pressure Resistance | 1.0MPa | 3.5MPa |
| Operating Temperature | NBR for -5~80°C and fluororubber for -5~80°C |
| Voltage Range | ±10% |
| Material of Body | Stainless Steel or Brass |
| Material of Oil Seal | NBR,EPDM or fluororubber |
2W series small oriffice Fluid Control Valve, also known
zero-pressure solenoid valve, the initial state for normally
closed,normally open only available for below 3/8", thread size
range from 1/8" to 3/8", Din connector type and flying leads
type,anti-explosion and anti-water coil are available. With the
stalbe quality and wide application, 2W valve is popular with customers, especially in the water treatment system, the 2W valve
is used widely.
Delivery
1. If the products we have in store, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL
will be normal ways. If you require use of a courier, we can do it.
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those
damages coursed by shipping or Man-made damaged ). A 15% restocking
fee is
assessed for any products returned in "used" condition. And then we
will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don’t plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get
your email.
