YIKANG AUTOMATION |
Verified Suppliers
|
|
CA76MM submerged air pulse valve G3Inch Aluminum Alloy Pilot Operated
Description
Very high performance diaphragm valve designed to be mounted
directly into the compressed air manifold. 1" and 1.5" models are
supplied with outlet pipes to length specified, 3" model is
supplied without outlet pipes.
Suitable for
Dust collector applications, in particular for reverse pulse jet
filter cleaning including bag filters, cartridge filters, envelope
filters, ceramic filters, and sintered metal fibre filters.
Maintenance
Before conducting any maintenance activity on the system ensure
that components are fully isolated from pressure and power
supplies. Pressure and power should not be reapplied until the
valve has been fully assembled. Diaphragm and pilot inspection
should be conducted annually.
Installation
1. MM valves are installed through the tank, refer to the
appropriate template listed
above.
2. To avoid any potential operational problems it is preferable
that the valves are
not mounted underneath the tank where condensation may collect. All
o-rings
should be coated with a silicone based lubricant or similar.
3. Dresser nut seals where used are a pressure seal only, not a
structural
component. Do not rely on dresser seals to retain either the tanks
or blowtubes.
Tanks and blowtubes must be independently restrained.
4. Tighten dresser nuts to 20Nm (15 ftlbs) max.
5. Tighten pipe outlets to 20 Nm (15 ftlbs).
6. Connect to pilot valve, if remotely actuated.
7. Ensure compressed air supply is dry and free from oil and dirt.
8. Check all cleaning system components are secure before applying
pressure.
9. Apply moderate pressure and check for leaks.
10.Fully pressurise system.
11.Test fire and listen for proper actuation and crisp pulse
noises.
Approvals
Integrally piloted valves meet the requirements of:
•C-Tick
•EMC (89/336/CE)
•ATEX II 3 G & D (94/9/CE) (when fitted with QR or QF type
solenoids)
Ordering Code | Port Size | Orifice | Flow Value | |
G Threaded | mm | Kv | Cv | |
CA76MM/RCA76MM | 3" | 76 | 200 | 233 |
Construction | |
Body | Aluminum (Diecast) |
Washer | SS 304 |
Armature | SS 430FR |
Core and Plugnut | Stainless steel |
Core Spring | SS 304 |
Sealing & disc | NBR(nitrile/buna-n) |
Screws | SS302 |
Diaphragm | PA-6(Standard), fluororubber |
Shading coil | Copper |
Connector | DIN43650A |
Voltage | DC: 24V, AC: 24V, 48V, 110V, 230V |
Working Temperature | -20 to +85℃ Nitrile seals -29 to +232℃ fluororubber seals |
Protection Class | IP65 |
Coil Insulation Class | F |
Working Pressure | 0.35-0.85Mpa |
Recommended on time range | 50-500ms |
Recommended time between pulses | 1 minute or Less |
Diaphragm kit
Model | Nitrile | fluororubber | Includes |
CA/RCA40MM Diaphragm kit | K4000 | K40007 | Diaphragm kits include main and secondary (where required) diaphragms and |
CA/RCA62MM Diaphragm kit | K5004 | K5000 | |
CA/RCA76MM Diaphragm kit | K7600 | K7601 | |
CA/RCA102MM Diaphragm kit | K10200 | K10201 |
Weights
Size | Integral Pilot (CA) Kg (lbs) | Remote Pilot (RCA)Kg (lbs) |
76 | 3.900 (8.60) | 3.680 (8.11) |
Dimensions
(Dimensions in mm and [inches])
After-sale Service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
Serves time
0:00 - 23:59
From Monday to Sunday