YIKANG AUTOMATION |
Verified Suppliers
|
|
Pulse jet valve
1. Used outside of bag-type duster sack-duster’s blowing and cleaning ash.
2. Adopte this kind of structure that submerge in the air porket..
3. Compare to other structure, reduce resistance in interval channel and pressure of blowing supplier.
4. So it adapt siuation of low pressure, reduce energy consumption and prolong membrance patch using.
Produce Structure
Tract: Valve’s crust and close over is made of aluminum alloy
that’s formed by pressing die, good appearance, heavy intensity, no
gas leak. Structure of connection of two back pressing air of
interval channel of valve is reasonable. this design make
“ubmerged-type” true due to opening and closing face of valve
locate in air pocket. Air from pocket can come in blowing
cannulation straightly. It accord request with low air pressure and
big quantity of blowing.
Electromagnetically operated valve: Control pulse valve by
remoting. With trube base coil and DIN electrical outlet, conwiniet
inner setting or outer setting, waterproof and dustproof for
protect. Upto JB/t5916-91 standard.
Membrane patch: Adopt dish-type, and big moving. Valve can be
opened in 0.08-0.1 second. You can choice synthetic rubber membrane
patch made of import materials in frigid climate. Membrane patch
can be longest used when working temperature is from -40℃ to -55℃.
1, Technical Paremeter
1Acclimation:
1) Temperature: -10~+55℃;
2) Working Medium: clean air
2Humidity: less than 85%
3Blowing Supplier Pressure: it’s better 0.2~0.3Mpa,or0.3~0.6Mpa.
4Blowing Tolerance: when blowing supplier pressure is 0.25Mpa and
blowing time is 0.1 second.
Construction | |
Body | Aluminum (Diecast) |
Washer | SS 304 |
Armature | SS 430FR |
Core and Plugnut | Stainless steel |
Core Spring | SS 304 |
Sealing & disc | NBR(nitrile/buna-n) |
Screws | SS302 |
Diaphragm | PA-6(Standard), fluororubber |
Shading coil | Copper |
Connector | DIN43650A |
Voltage | DC: 24V, AC: 24V, 48V, 110V, 230V |
Working Temperature | -20 to +85℃ Nitrile seals -29 to +232℃ fluororubber seals |
Protection Class | IP65 |
Coil Insulation Class | F |
Working Pressure | 0.35-0.85Mpa |
Recommended on time range | 50-500ms |
Recommended time between pulses | 1 minute or Less |
Photo Show
Samples
You can send a sample to customize the products, we have many
engineers can help it; If you want a product of mine, but you are
not sure if it's what you want, so you can ask for a sample from
me, it will be free.
Delivery
1. If the products we have in store, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex,
TNL will be normal ways, If you require use of a courier, we can do
it.
4. Also we can send by your delivery acount if you want.
Products shopping guide
For example: you want to purchase a batch of cylinders but you
don't know which type you are really want, so you can tell me all
your requirement and I'll recommend to you.
After-sale service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.