Home Companies Changzhou TIANNIU Transmission Equipment Co., Ltd

MZ-K Heavy Duty Load Clutch Cam Sprag One Way Bearing MZ50 70K

Contact Us

[China]

Trade Verify

Address: No. 203, Gaotiantou, Liudao Industrial Park, Yaoguan Town, Wujin District, Changzhou City, Jiangsu Province

Contact name:Christina Liu

Changzhou TIANNIU Transmission Equipment Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

MZ-K Heavy Duty Load Clutch Cam Sprag One Way Bearing MZ50 70K

Country/Region	china
City & Province	changzhou jiangsu
Categories	Brackets

Product Details

MZ-K Heavy Duty Load Clutch Cam Sprage One Way Bearing MZ50 70K

Production introduction

1. MZ-K Series are shielded by bearings on both ends, packed with a

grease.

2. High tension bolts are recommended for pulleys, gears or

sprockets fixing to the outer race of cam clutch. (refer the drawing)

3. Fix Clutch by an end plate to shaft end. (refer the side drawing)

4. Ambient temperature range is -5to +40C

Type MZ is a sealed, sprag type freewheel, bearing supported using two 60..ZZ series grease lubrucated bearings. Units are delivered grease lubricated ready for installation. MZ units are intended as multipurpose, to be used in various applicatoins. A typical mounting arrangement is shown on the following page. The inner race is keyed to the shaft. The inside diameter of the outer race should be used as the mounting register for the connected parts( sprocket, pulley, gear, torque arm...). The mounting spigot should be to g6 tolerance

Item	MZ60-50
Material	GCr15
Bore dia.	50 mm
Outer dia.	155 mm
Width	102 mm
Torque capacity	2110 N.m
Drag torque	0.98 N.m
Weight	10.2 kg
Package	Carton box, wooden box or as your requirements

Products Parameters

Model	Capacity Torque (Nm)	Torque Drag (Nm)	Over running (r/min) Max. Inner Race	Over running (r/min) Max. Outer Race	indexing Max. (cycle /min)	Bore Size Dia (H7)	Key way	A	B	C	PCDD	(M6) E	F	G	H-M No. of Tapped x HolesSize× Pitch	S	Wt (kg)
MZ15	186	0.20	2,200	900	150	15	5*2.3	62	68	60	58	47	25	5.5	6M5P0.8	10	1.4
MZ17	215	0.20	2,000	800	150	17	5*2.3	66	75	64	64	52	28	6.3	6M5P0.8	10	1.8
MZ20	323	0.29	1,900	700	150	20	6*2.8	67	80	65	68	55	30	7.6	6M6P1.0	12	2.0
MZ30-22	735	0.39	1,800	500	150	22	6*2.8	82	100	80	88	75	45	8.9	6M8P1.25	16	3.7
MZ30-25	735	0.39	1,800	500	150	25	8*3.3	82	100	80	88	75	45	8.9	6M8P1.25	16	3.7
MZ30	735	0.39	1,800	500	150	30	10*3.3	82	100	80	88	75	45	8.9	6M8P1.25	16	3.7
MZ35	1,080	0.49	1,700	300	150	35	10*3.3	87	110	85	95	80	50	8.7	6M8P1.25	16	4.8
MZ45-40	1,620	0.69	1,700	300	150	40	12*3.3	92	125	90	110	95	60	8.4	8M8P1.25	16	6.2
MZ45	1,620	0.69	1,700	300	150	45	14*3.8	92	125	90	110	95	60	8.4	8M8P1.25	16	6.2
MZ60-50	2,110	0.98	1,600	250	150	50	14*3.8	102	155	100	140	125	80	9.1	8M8P1.25	16	10.2
MZ60-55	2,110	0.98	1,600	250	150	55	16*4.3	102	155	100	140	125	80	9.1	8M8P1.25	16	10.2
MZ60	2,110	0.98	1,600	250	150	60	18*4.4	102	155	100	140	125	80	9.1	8M8P1.25	16	10.2
MZ70-65	3,040	1.27	1,300	250	150	65	18*4.4	105	175	103	162	145	95	8.6	8M8P1.25	16	13.2
MZ70	3,040	1.27	1,300	250	150	70	20*4.9	105	175	103	162	145	95	8.6	8M8P1.25	16	13.2