Home Companies Changzhou TIANNIU Transmission Equipment Co., Ltd

Rigid Clamping Aluminum Metric Shaft Coupling High Torque GNC

Changzhou TIANNIU Transmission Equipment Co., Ltd

Contact Us

[China] country

Trade Verify

Address: No. 203, Gaotiantou, Liudao Industrial Park, Yaoguan Town, Wujin District, Changzhou City, Jiangsu Province

Contact name:Christina Liu

Inquir Now

Changzhou TIANNIU Transmission Equipment Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Rigid Clamping Aluminum Metric Shaft Coupling High Torque GNC

Country/Region china
City & Province changzhou jiangsu
InquireNow

Product Details

Rigid Clamping Aluminum Alloy Shaft Coupling Metric With High Torque

 

Products Features 

The flanged coupling is a rigid coupling, which is to connect two half-couplings with flanges to the two shafts with ordinary flat keys, and then use bolts to connect the two half-couplings into one to transmit motion. and torque. This kind of coupling has two main structural forms: 1. Relying on the hinged hole to use bolts to achieve the alignment of the two shafts and relying on the bolt rod to withstand extrusion and shearing to transmit torque; 2. relying on a half-coupling on the The shoulder is aligned with the groove on the other coupling half. The bolts connecting the two half-couplings can use ordinary bolts of grade B and B, and the torque is transmitted by the friction torque of the joint surfaces of the two half-couplings.

The material of the flange coupling can be gray cast iron or carbon steel, and cast steel or forged steel shall be used for heavy load or when the peripheral speed is greater than 30 m/s. The flange coupling has high requirements on the neutrality of the two shafts. When there is relative displacement between the two shafts, additional loads will be caused in the parts and the working conditions will be deteriorated. This is its main disadvantage. However, due to the simple structure, low cost and large torque transmission, when the rotation speed is low, there is no impact, and the rigidity of the shaft is large

 

>Integrated structure, the overall use of high-strength aluminum alloy materials
>High torque, high rigidity
>The rigid type basically does not allow eccentricity, so it must be fully adjusted in use
>Fastening method of setscrew screw

 

 

Products Parameters 

 

 

model parameter common bore diameter d1,d2 ΦD L F M tightening screw torque
(N.M)
GNC-16x16 3,4,5,6,6.35,7,8 16 16 3.75 M2.5 1
GNC-16x24 3,4,5,6,6.35,7,8 16 24 3.75 M2.5 1
GNC-20x20 4,5,6,6.35,7,8,9,9.525,10 20 20 3.75 M2.5 1
GNC-20x30 4,5,6,6.35,7,8,9,9.525,10 20 30 3.75 M2.5 1
GNC-25x25 5,6,6.35,7,8,9,9.525,10,12 25 25 6 M3 1.5
GNC-25x36 5,6,6.35,7,8,9,9.525,10,12 25 36 6 M3 1.5
GNC-28.5x38 6,6.35,7,8,9,9.525,10,12,12.7,14 28.5 38 7.8 M4 2.5
GNC-32x32 6,6.35,7,8,9,9.525,10,12,12.7,14,15,16 32 32 7 M4 2.5
GNC-32x41 6,6.35,7,8,9,9.525,10,12,12.7,14,15,16 32 41 7.75 M4 2.5
GNC-40x44 8,9,9.525,10,11,12,12.7,14,15,15,17,18,19,20 40 44 10.5 M5 7
GNC-40x52 8,9,9.525,10,11,12,12.7,14,15,15,17,18,19,20 40 52 10.5 M5 7
GNC-50x55 10,11,12,12.7,14,15,16,17,18,19,20,22,24,25 50 55 13 M6 12
GNC-50x66 10,11,12,12.7,14,15,16,17,18,19,20,22,24,25 50 66 16 M6 12
GNC-63x71 10,11,12,12.7,14,15,16,17,18,19,20,22,24,25,28,30,32,35 63 71 16.5 M6 12

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

model parameter Rated torque
(N.M)*
allowable eccentricity
(mm)*
allowable deflection angle
(°)*
allowable axial deviation
(mm)*
maximum speed
rpm
moment of inertia
(Kg.M2)
Material of shaft sleeve surface treatment weight
(g)
GNC-16x16 5 - - - 1000 2.9x10-7 High strength aluminum alloy Anodizing treatment 7
GNC-16x24 5 - - - 9400 2.9x10-7 13
GNC-20x20 10 - - - 7500 8.6x10-6 15
GNC-20x30 10 - - - 7500 8.6x10-6 25
GNC-25x25 12 - - - 6000 2.7x10-6 29
GNC-25x36 12 - - - 6000 2.7x10-6 43
GNC-28.5x38 14 - - - 5500 2.5x10-6 48
GNC-32x32 15 - - - 4700 7.1x10-6 55
GNC-32x41 15 - - - 4700 7.1X10-6 65
GNC-40x44 19 - - - 4000 1.45x10-5 123
GNC-40x52 19 - - - 4000 1.45x10-5 150
GNC-50x55 45 - - - 4000 7.0x10-5 240
GNC-50x66 45 - - - 4000 7.0x10-5 280
GNC-63x71 100 - - - 3500 9.0x10-5 320
 

Hot Products

GH Oldham Type Coupling Cross Sliding Set Screw Rigid Shaft Coupling Products Parameters model ...
GHC Oldham Type Coupling Cross Sliding Set Screw Rigid Shaft Coupling​ Products Parameters model ...
Shaft Coupling GHC Series Aluminium Flexible 40x50mm Oldham Style Coupling Products Introduction ...
GHC Oldham Type Coupling Cross Sliding Aluminium Steel Flexible Shaft Coupler Clamping Products ...
GH Series Shanf Couping Sliding Block Oldham Flexible Coupling Machine Products Introduction Oldham ...
Shaft Coupling GH-50*38 Cross Sliding Set GH Screw Rigid Oldham Products Parameters model parameter ...