BS160HS BS220HS High Torque One Way Clutch Conveyor Rollers Over Running Clutch

BS-HS Series BS-HS Series High Torque Cam Clutch BS 200 Back Stop Clutch Bearing for Belt Conveyor

Production introduction

Introduction of High Torque Cam Clutch BS 200 Back Stop Clutch Bearing for Belt Conveyor
The BS series Cam Clutches are intended for applications where reverse rotation of the slow speed conveyor head shaft is to prevented (backstopping)

Characteristic

 BS series are of cam or roller construction.

 perfect dust prevention scheme to isolate dust.

due to the development and use of special cams, the products have higher reliability.

bs30 ~ bs135 products have been sealed with grease type, so no more grease is required.

low speed air transition products installed on the final shaft of conveyors, pumps, etc.

bs-hs series is a high-speed product that greatly improves the maximum idle speed and allowable torque on the premise of maintaining the advantages of BS series.

Installation and use

Special non-return clutch for conveyor. (for low speed)

The type of grease has been sealed, and no more grease is required. (small model)

Adopt dust-proof measures of double-layer structure.

Applicable occasions

A clutch designed to prevent reverse rotation of the conveyor. The bs-hs series that greatly improves the maximum idle speed and allowable torque (for low speed) is added.

For low-speed idling.

Low speed air transformation products installed on final rotating shafts such as conveyors and pumps.

Torque: 294 ~ 686000n m30～70000kgfm

Products Parameters 

Notes:
1. The tolerance of Stock Finished Bore is H7.
2. Items hilighted in bold type are stock items, the others are built to order.
3. BS Cam Clutch can be bored according to your specification.
Specify the bore diameter with tolerance and keyway dimensions.
Please be sure to specify.