Home Companies Changzhou TIANNIU Transmission Equipment Co., Ltd

CKZ-B45150 Roller Overrunning Clutch One Direction Clutch Bucket Elevator

Contact Us

[China]

Trade Verify

Address: No. 203, Gaotiantou, Liudao Industrial Park, Yaoguan Town, Wujin District, Changzhou City, Jiangsu Province

Contact name:Christina Liu

Changzhou TIANNIU Transmission Equipment Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

CKZ-B45150 Roller Overrunning Clutch One Direction Clutch Bucket Elevator

Country/Region	china
City & Province	changzhou jiangsu

Product Details

CKZ-B One Direction Clutch For Bucket Elevator

Production introduction

CK-B series is a wedge type one-way clutch with key grooves on both ends of the outer ring without bearing support. Radial dimensions are the same as standard bearing dimensions. When used, it needs to be installed with bearings to withstand axial and radial loads. Grease has been added at the factory.
The standard installation method is that the CK-B model is coaxially side-by-side with the bearing, and the same tolerance requirements are required. The inner ring and the shaft are connected by keys. The outer ring has a dimensional tolerance of h7 and is matched with the machine wall with a tolerance of H7. The end face keys on both sides of the outer ring are used to fix the outer ring and the machine wall to transmit torque.
This series is often used in packaging, printing, food, medical, textile, chemical and other machinery and equipment

1. CKZ-BSeries Cam Clutch is Shielded by shield bearings on both ends, packed with a special grease, and are ready for use. No additional lubricant is required.
2. For attaching pulleys, gears or sprockets to the clutches, insert hubs (with f7 tolerance of ISOR773) along the inner surface of the outer race and screw the bolts (high tension) into the tapped holes on the clutch end.
3. Recommended shaft tolerances are shown in the table on the lower left.
4. External thrust load should be supported by other devices, not by the Cam Clutch.
5. Use only a parallel key to secure the clutch to the shaft. Do not use a tapered Key.
6. When mounting the clutch onto the shaft, apply pressure to the inner race but never to the outer race.
7. Ambient temperature range is 5° To 40° C.
8. Key to be used should be in accordance with ISOR773. (DIN 6885.1)

Products Parameters

Type	Nominal Torque [N.m]	Overrunning Limited Speed [r/min]		Dimension In Contour [mm]											Weight [kg]
		Overrunning Limited Speed [r/min]		Outer Race Size							Inner Race Size
		inner race	outer race	D[h7]	D1[H7]	B	F	n-M	E	H	d[H7]	C	bn×tn	e
CKZ-B25110	404	700	300	110	80	68	95	6-M8	15	20	25	70	10×3.3	4.5	3.98
CKZ-B35130	825	560	250	130	90	85	100	6-M10	15	25	35	87	10×3.3	4.5	7.01
CKZ-B45150	1464	490	200	150	110	90	130	6-M10	20	25	45	92	14×3.8	4.5	9.69
CKZ-B50165	1830	420	150	165	120	92	145	6-M12	20	25	50	97	14×3.8	5	12.36
CKZ-B50180	2990	420	150	180	125	106	160	6-M12	20	25	50	108	16×3.8	5	16.51
CKZ-B60200	3494	350	120	200	150	115	180	6-M12	25	25	60	117	20×4.9	6	22.02
CKZ-B70240	4920	350	120	240	170	122	210	6-M14	25	30	70	124	22×5.4	6	34.65
CKZ-B75260	5760	280	100	260	200	130	230	6-M18	25	35	75	138	22×5.4	8	42.38
CKZ-B80300	7500	280	100	300	230	136	265	6-M18	25	35	80	138	22×5.4	8	57.17
CKZ-B25100	400	750	350	100	75	80	88	6-M8	10	16	25	82	8×3.3	4.5	2.62
CKZ-B28105	400	700	300	105	80	68	95	6-M8	15	16	28	70	10×3.3	4.5	2.75
CKZ-B3090	350	800	380	90	62	49	75	6-M6	10	15	30	50	8×2.0	4	4.86
CKZ-B3290	380	800	380	90	65	60	80	8-M6	10	16	32	60	10×3.7	4	4.32
CKZ-B30110	404	700	300	110	80	68	95	6-M8	15	16	30	70	10×3.3	4.5	3.91
CKZ-B32125	1021	560	250	125	95	90	110	8-M8	15	12	32	92	10×3.3	4.5	6.53
CKZ-B35115	800	700	300	115	72	78	95	6-Φ11	15		35	78	10×3.3	4.5	4.63
CKZ-B40125	800	600	300	125	95	76	110	6-M8	15	18	40	80	12×3.3	4.5	5.60
CKZ-B45190	2150	380	130	190	130	86	160	4-Φ14	20		45	86	14×3.8	6	17.5
CKZ-B55155	1735	490	200	155	125	100	140	8-M8	20	20	55	102	16×4.3	5	10.96
CKZ-B55175	1800	420	150	175	110	79	155	6-M10	20	15	55	87	16×4.3	5	14.92
CKZ-B60180	3100	420	150	180	140	124	158	8-M10	25	20	60	128	18×4.4	6	17.25
CKZ-B65180	3100	420	150	180	140	122	158	8-M10	25	20	65	124	18×4.4	6	16.68
CKZ-B80160	1830	420	150	180	130	100	145	6-M8	25	20	80	112	22×5.4	6	11.42