Man Machine Interface Drill And Tapping Machine Four Spindle Horizontal Machining Center

SF-120LH3Z Three Spindle Vertical Sliding Type Drilling & Tapping Special Purpose Machine

Specification:

1. Use imported PLC in order to achieve fat insert, vocational insert and fast reverse.

2. Suitable for batch processing gate valve, ball valve, double hole pipe and other plumbing products.

3. Be able to double drilling and tapping at one time, and make high quality productions.

4. The hydraulic system is controlled by precise solenoid valve, which has such merits as convenient pressure and speed adjustment, uniform dimension for installation, strong interchangeability to make it operate stably and position correctly.

5. Slider system with guide way ultrasonic frequency quenching and lubricating system for longer service life and higher precision.

6. Cross slider has lubricating system, driven by cylinder for better location and stabilization.

7. This machine uses Man-machine Interface, with the function of reporting abnormal states, thus circuit errors will be detected in time, and Automatic Chip Removal System can be added according to customer's needs

Technical Parameters

◆ Max reaming diameter: Φ60mm

◆ Drilling spindle motor: 3KW/4P

◆ Tapping spindle motor: 3KW/6P

◆ Spindle taper: BT40 (7:24-40#)

◆ Max tapping diameter: M50

◆ Hydraulic pressure: 1.5~3.5Mpa

◆ Pipe (brass piece): G1 3/4

The spindle motor may be adjusted appropriately depending on the actual situations

◆ Cycle time: 14±2s

Sliding table use hydraulic pressure power system   With qucik chuck can clip a variety of cutter

Achieved sliding from station 1 to 2 back and forth

to complete two-way drillingand tapping

Intermittent automatic lubricating pump                     Individual hydraulic pressure station,equipped with                                                                                       cooling system

  Left drilling power unit,right tapping power unit

Especially using for sanitaryware( faucet ),auto/motorcycle accessory,hardware

After-sales 

We offer 2 year quality guarantee,and free charges of machine operate training .