Shenzhen XH Technology Co., Ltd. |
Verified Suppliers
|
|
3mm Thin White Plexiglass Acrylic Sheet Custom Cutting Lucite Panels
White Plexiglass Acrylic Sheet 3mm thin large roof extruded lucite
panels custom cutting
1. Product Description
Due to the difficulty and high cost of acrylic
production, there are many low-quality and cheap substitutes on the
market. These substitutes, also known as "acrylic", are actually
ordinary organic boards or composite boards (also known as sandwich
boards). Ordinary plexiglass is cast with ordinary plexiglass
cracking material and pigments. The surface hardness is low, it is
easy to fade, and the polishing effect is poor after grinding with
fine sand. The composite board only has a thin layer of acrylic on
the surface, and the middle is ABS plastic, which is easy to
delaminate due to thermal expansion and contraction during use.
Real and fake acrylic can be identified from the subtle color
difference and polishing effect of the sheet section.
2. Parameter
Physical Property of Cast Acrylic sheet | |||
PROPERTY | UNIT | VALUE | |
MECHANICAL | Specific Gravity | - | 1.19-1.2 |
Roswell Hardness | kg/cm 2 | M-100 | |
Shear Strength | kg/cm 2 | 630 | |
Flexural Strength | kg/cm 2 | 1050 | |
Tensile Strength | kg/cm 2 | 760 | |
Compressive Strength | kg/cm 2 | 1260 | |
ELECTRICAL | Didlectic Strength | Kv/mm | 20 |
Surface Resistivity | Ohm | > 10 16 | |
THERMAL | Specific Heat | Cal/grºC | 0.35 |
Coefficient of Thermal Cortductivily | Cal/xee/cm/ºC/cm | ||
Hot Forming Temp | ºC | 140-180 | |
Hot Defomation Temp | ºC | 100 | |
Thermal Expansion Coefficient | Cmfcm/V | 6×10-5 | |
MISCELLANEOUS | Water Absorption(24Hrs) | % | 0.3 |
Teste | % | None | |
Odor |
3. How to cut acrylic sheet?
Acrylic products are also very common in our
lives. How do acrylic sheets become the various finished products
we see in our lives?
1. Cutting:
Laser cutting is a non-contact cutting method. Laser cutting
acrylic can cut acrylic into various shapes at will. It can cut
characters, patterns, and furniture. The application of laser
cutting machine can use acrylic to make various logos, including
complex patterns, etc., which has a very important role and status
in the advertising industry. Acrylic cutting is the most common
process in laser cutting acrylic applications.
2. Punch holes:
Acrylic sheet can also be directly punched. Compared
with glass, acrylic has very good machining characteristics. Using
a laser cutting machine to punch holes has very high assembly
accuracy. You only need to make pictures in the computer.
Perforated acrylic.
3. Polishing:
Acrylic sheet itself has high transparency.
After polishing the acrylic, it has the same high transparency as
crystal. The polished acrylic is very smooth and highly
appreciative. It can be used as a variety of handicrafts.
4. Acrylic sheet Application
5. XH Company and Production Line
7. Package and shipping
7.1. One piece of acrylic sheet package: double-sided covered with kraft paper or PE film, the cover film does not have any LOGO of our company.
7.2. Tray package: the total weight of each pallet is about 2 tons, the bottom is wooden pallet or iron pallet, and the surrounding is packed with corrugated paper.
7.3. The packaging method of the whole container: 20-23 tons (about 3000 pieces) 20-foot container, 10-12 pallets.