Solid Plastic Perspex Polycarbonate Sheet Clear Greenhouse Panels
Clear polycarbonate sheet solid plastic perspex roof panels for
greenhouse
1. Product Description
PC board is also called polycarbonate board,
polyester board, Kapron board. Weak acid resistance is made of
polycarbonate as the main component and is made of co-extrusion
technology CO-EXTRUSION. It shows that the PC board is resistant to
neutral oil, strong acid, durability, and alkali. It needs to be
coated with UV. . However, high temperature resistance and good
lighting effect PC solar panels (also known as polycarbonate hollow
panels, glass Kapron panels, PC hollow panels) are made of
high-performance engineering plastics - polycarbonate (PC) resin.
It has the characteristics of high transparency, light weight,
impact resistance, sound insulation, heat insulation, flame
retardancy, anti-aging, etc. It is a high-tech, comprehensive
performance, energy-saving and environmentally friendly plastic
sheet. It has the incomparable advantages of other building
decoration materials (such as glass, plexiglass, etc.).
2. Parameter
3. Clear polycarbonate sheet features:
1. Features:
(1) Light transmittance: The light transmittance of PC board can
reach up to 89%, which can be beautiful with glass. The UV coated
board will not produce yellowing, fogging and poor light
transmission under the sun. The loss of light transmission after
ten years is only 6%, the loss rate of PVC is as high as 15%-20%,
and the loss rate of glass fiber is 12%. %-20%.
(2) Impact resistance: The impact strength is 250-300 times that of
ordinary glass, 30 times that of acrylic sheets of the same
thickness, and 2-20 times that of tempered glass. There is no crack
when dropped from two meters below a 3kg hammer. Glass" and "Sound
Steel".
(3) Anti-ultraviolet: One side of the PC board is coated with
anti-ultraviolet (UV) coating, and the other side has
anti-condensation treatment, which integrates the functions of
anti-ultraviolet, heat insulation and anti-drip. It blocks UV rays
from passing through and is suitable for protecting valuable
artwork and exhibits from UV damage.
(4) Light weight: the specific gravity is only half of that of
glass, saving the cost of transportation, handling, installation
and supporting the frame.
(5) Flame retardant: The national standard GB50222-95 confirms that
the PC board is a flame retardant grade 1, that is, B1 grade. The
PC board's own ignition point is 580 degrees Celsius, and it will
self-extinguish after leaving the fire. No toxic gas will be
produced when burning, and it will not contribute to the spread of
the fire.
(6) Bendability: According to the design drawing, the cold bending
method can be adopted on the construction site, and it can be
installed into an arch, semi-circular top and window. The minimum
bending radius is 175 times the thickness of the plate, and it can
also be hot bent.
(7) Sound insulation: The sound insulation effect of PC board is
obvious, and it has better sound insulation than glass and acrylic
board of the same thickness. Under the same thickness, the sound
insulation of PC board is 3-4DB higher than that of glass.
Internationally, it is the material of choice for highway noise
barriers.
(8) Energy saving: keep cool in summer and keep warm in winter, PC
board has lower thermal conductivity (K value) than ordinary glass
and other plastics, and the thermal insulation effect is 7%-25%
higher than that of the same glass. Hot up to 49%. Therefore, the
heat loss is greatly reduced, and it is an environmentally friendly
material for buildings with heating equipment.
(9) Temperature adaptability: PC board does not become cold and
brittle at -100 °C, does not soften at 135 °C, and its mechanics
and mechanical properties have no obvious changes in harsh
environments.
4. Clear polycarbonate sheet Application
Gardens, amusement places strange decoration and corridor pavilions
of resting places;
Interior and exterior decoration of commercial buildings, curtain
walls of modern urban buildings;
Aviation transparent containers, motorcycle front windshields,
airplanes, trains, ships, automobiles, motorboats, submarines and
glass military police shields;
Layout of telephone booths, advertising street signs, light box
advertisements, and exhibitions;
Instruments, meters, high and low voltage switch cabinet panels and
military industries;
High-grade interior decoration materials such as walls, ceilings
and screens;
Noise barriers for highways and urban elevated roads;
Agricultural greenhouses and breeding greenhouses;
Modern ecological restaurant ceiling;
5. XH Company and Production Line
7. Package and shipping
7.1. One piece of acrylic sheet package: double-sided covered with
kraft paper or PE film, the cover film does not have any LOGO of
our company.
7.2. Tray package: the total weight of each pallet is about 2 tons,
the bottom is wooden pallet or iron pallet, and the surrounding is
packed with corrugated paper.
7.3. The packaging method of the whole container: 20-23 tons (about
3000 pieces) 20-foot container, 10-12 pallets.
