4x8 Custom Cut Acrylic Panels Large PMMA Sheet With Laser Machine

4x8 Custom Cut Acrylic Panels Large PMMA Sheet With Laser Machine

4x8 custom cut acrylic sheet how to cut large PMMA panels with laser machine
 
1.   Laser Cutting Acrylic Sheet

      The principle of acrylic laser cutting Acacrylic laser cutting is to focus the laser beam on the surface of the material, make the material melt, and move the laser beam and the material along a certain trajectory, forming a certain shape slit. Advantages of laser cutting:

1. Good cutting quality: no contact cutting, the cutting edge is very little affected by the heat, basically no thermal deformation of the workpiece, completely avoid the collapse of the edge formed by the material cutting, cutting joints generally do not need secondary processing.

2. No damage to the surface of acrylic products: the laser cutting head will not contact with the surface of the material, to ensure that the acrylic surface does not scratch.

3. Save the mold investment: laser processing does not need the mold, no mold consumption, do not need to repair the mold, save the time of the mold replacement, thus saving the processing costs, reduce the production cost, especially suitable for the processing of large products.

4. Save materials: using computer programming, you can put different shapes of acrylic products for the whole plate materials set, to maximize the utilization rate of materials.

5. Improve the development speed of new products: After the product drawings are formed, the laser processing can be carried out immediately, and the real acrylic products can be obtained in the shortest time

 
2.Parameter

3.    The tool for cutting acrylic sheet

      How to cut the acrylic board by hand Many customers will ask how to cut the acrylic board by hand, because most of their own hands do not have a special acrylic cutting tools; Next is my for the acrylic plate manual cutting method inventory and summary hope can help you 1. How to cut —— acrylic plate: Acacrylic board is generally cut with a hook knife, electric grinding can also be, but the best serrated stainless steel saw blade, must be low speed, high speed will melt Acacrylic plate; curve saw best, chacksaw also, but larger section One, how to cut the acrylic board at home 1. Prepare cutting tools: we can prepare a hook knife, which is a cutting tool specially used to cut Plexiglass, plastic plate and other materials.If there is no hook knife in the home, you can also use the art knife, splint knife and other cutting tools. 2. Marker: we should first square the acrylic board on the ground. Next, we should determine the position to cut, and then use a ruler and a marker to mark the cutting position. 3. Cutting: We should first wear anti-cutting gloves, and then put the steel ruler on the other end of the cutting mark line, and then cut along the cutting line with a hook knife.If the plate cutting position is uneven and other problems, you can use sandpaper to polish the cutting surface flat. Press the ruler on the acrylic plate that needed to be cut, and make a straight and thin groove in the acrylic plate with a splint knife.Place the acrylic plate with straight grooves on the right edge table.Place the straight grooves of the acrylic plate at the edge of the operating table.Press down with the hand, the acrylic plate immediately along the straight line groove neatly disconnected

 
4.  XH Company and Production Line

5.  Package and shipping

 
7.1. One piece of acrylic sheet package: double-sided covered with kraft paper or PE film, the cover film does not have any LOGO of our company.
7.2. Tray package: the total weight of each pallet is about 2 tons, the bottom is wooden pallet or iron pallet, and the surrounding is packed with corrugated paper.
7.3. The packaging method of the whole container: 20-23 tons (about 3000 pieces) 20-foot container, 10-12 pallets.