|
[China]
Trade Verify
Address: Room1504,6th Building,GaoSheng Times Square,No.798 zhongYiyi Road,Yuhua District,Changsha City,Hunan,China
Contact name:Julia
Changsha Zhinian Automation Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
MR-J2S | Servo amplifier type name | MR-J2S-700B | |||||||
Corresponding servo motor type name |
| ||||||||
Servo amplifier | Control | Voltage, Frequency | Single phase AC 200 ~ 230V / 50, 60Hz | ||||||
Allowable voltage fluctuation | Single phase AC170 ~ 253V | ||||||||
Allowable frequency variation | Within ± 5% | ||||||||
Input (W) | 50 | ||||||||
Main circuit power | Voltage, Frequency (Note 1) | Three phase AC 200 ~ 230V / 50, 60Hz (Note 2) | |||||||
Allowable voltage fluctuation | Three phase AC 200 to 230 V: Three phase AC 170 to 253 V | ||||||||
Allowable frequency variation | Within ± 5% | ||||||||
Power supply capacity |
| ||||||||
Inrush current |
| ||||||||
Control method | Sinusoidal PWM control · Current control method | ||||||||
Dynamic brake | Built-in (Note 3) | ||||||||
Protection function | Over current shutdown , regeneration overvoltage shutdown, overload shutdown (electronic thermal), servo motor overheat protection, detector fault protection, regeneration fault protection, undervoltage, instantaneous power failure protection, overspeed protection, | ||||||||
Maximum command input during position control | Equivalent to 10Mpps | ||||||||
rescue | Forced cooling , open (IP00) | ||||||||
Environment | Main Temperature | 0 to 55 ° C (not to be frozen), Storage: -20 to 65 ° C (not to be frozen) | |||||||
Weekly humidity | 90% RH or less (No condensation), Conservation: 90% RH or less (No condensation) | ||||||||
atmosphere | Indoors (no direct sunlight), corrosive gas, flammable gas, oil mist, dust free | ||||||||
Elevation / Vibration | Less than 1000m above sea level / 5.9m / s2 or below | ||||||||
Weight (kg) | 7.2 | ||||||||
The Mitsubishi MR-J2S-700B (MRJ2S700B) is a 7kW, 200V Melservo
MR-J2 servo amplifier SSC NETWORK. The first of the two power
supplies in this servo amplifier is the control circuit. The
control circuit has a voltage of 200 to 230VAC that functions on
1-phase and its frequency is 50/60Hz. The voltage of the
MR-J2S-700B servo amplifier in itself may expand to a similar
1-phase between 200 and 253VAC. The frequency is authorized to
waver between +5% and -5%. The other power supply, the main
circuit, has exactly the same voltage and frequency and their
extended ranges except for the fact that is operates on a 3-phase
instead of 1-phase.
The MR-J2S-700B servo amplifier is permitted to have four discrete
servo motors, namely those outlined in the following: HC-SFS702(B),
HA-LFS601(B), HA-LFS702, and HA-LFS701M(B).
The MR-J2S-700B servo amplifier has four ports. The CN1A and CN1B
ports can both participate in the SSCNET. The CN1B participates by
linking with other amplifier and/or a terminal connector (this
terminal connector is a MR-A-TM). The CN1A port (also linked to the
SSCNET) can connect to a motion control module and a positioning
control module that are from the Q series or a series. Then, the
CN2 port may connect to a servo motor from the specific servo
motors attachable to the MR-J2S-700B servo amplifier. The final
port, the CN3, may link to a personal computer which possesses an
MR Configurator, allowing the MR-J2S-700B servo amplifier to
engender the RS-232C communication, permitting the association
between the servo amplifier and the personal computer.
Applications:
Conveyors, Food preparation machinery, Printers, Small loaders and unloaders, Small robots and component assembly devices, Small X-Y tables, Small press feeders.
