High Speed Plastic Washing Recycling Machine For PP PE Milk Bottles

High Speed Plastic Washing Recycling Machine For PP PE Milk Bottles

Plastic Washing Recycling Machine has two different washer, so PP PE HDPE is one line, PET bottle washer plant is the other line. Because the PP PE material is floating over the water, but the pet material is under the water, According to this characteristic, they need to separate.

Suit for these kind bottles recycle:

PP PE milk bottles washer, PP PE cola bottles washer, PP PE shampoo bottle washer, PP PE oil barrel washer, PET drinking bottles washer.

STPLAS MACHINERY new steam washer has a special design for discharging the label and bottle cap which float on the water.This new design improves the quality of the clean flakes.

Plastic Washing Recycling Machine Description:

-This pet flake hot washer machine is used for mixing waste HDPE PET bottle scrap.

-The material will stay at hot washer for 8-10 minutes, and the hot washer steamer feed with chemical (caustic Soda/NaOH/or other detergent) , and the temperature should be keep 90-95℃.

-this system can be used Gas, electric and diesel to steam the hot washer according the customer requirement.

-Rotor shaft inside hot washer is made by stainless steel.

Plastic Washing Recycling Machine Main technical parameter

Plastic Washing Recycling Machine shining points:

1. Our Machine raw material adopt stainless steel 304.

2. Our PET bottle crusher equiped with the force feeding pressing device,

when the pet bottle us non - pressed, having this device will effectively avoid the

bottle jump inside the chamber of the crusher, at the mean time, this device can

enhance capacity to some degree.

3. High speed friction washer is new type. since the blade of the friction washer is easy to get blunt, so the new type friction washer blade can be dismantled and be changed.

4. Dewatering machine is also new type: the rotary speed can reach to 2200rpm. While the old model can be 1200. the new type can dry the pet flakes to 2% moisture content.

no need the air pipe dryer and blower, and at the same time,save power for you.

FAQ:

Q: What’s the grade for PET Bottle Flake which is recycled by your machine line?

A: Test report

Q: How often are the Crusher blades sharpened?

A: After continuous working at 30-40hours, the blades have to be sharpened

Q: How about the rate for removing the labels by Label remover?

A: Compressed bottle: more than 95%

Un-compressed bottle: more than 98%

Q:What’s the temperature of steam washer ?

A: Usually 80-90℃ ( If the temperature is over 100℃, the Flake will be roll.so the best temperature is 80-90℃)

Q: What’s the moisture after Horizontal dewatering machine?

A: About 1.8%.

Q: What’s the price of the complete machine line?

A: Depends on the capacity you need and also the device

If you want to know more information, welcome to contact us freely.