Active Member
|
[China]
Address: B11 of Jinfeng Science&Technology Pioneering park,Jinfeng Town, Zhangjiagang city, Jiangsu PR. China
Contact name:sugar wang
LIANDA Machinery Co.,Ltd. |
|
|
PE Film Recycling Machine For Washing Recycling Line
>>>>Soft Plastic (Film/woven bag/fiber/rope) Washing Line has smart
modular design aiming at agricultural film, industrial packaging
film, bag, blowing molding packaging bottle/box, injection and
electronic waste recycling. It is including sorting, size
reduction, metal removing, cold and hot washing, high efficiency
friction washing and drying modular. Which can remove most of
contaminants such as ferrous and nonferrous metals, sand, oil,
glue, paper label and many other different contaminants
efficiently. Moreover, turn key solution can be provided with all
water treatment, processing of sludge, paper stick, labels and etc.
>>Including metal detector, crusher, high speed friction
washing,hot/cold washing and drying machine.
You can get a different module combinations design from Lianda
according to your requirements. In range of different raw
materials, Lianda provides 300-1000kg/h economy and high-level
production lines.
Machine List and working processing
>>After getting waste plastic raw material, LIANDA Technicians will
study and analysis the main contaminants , then provide a proper
solution to remove most of the impurities by the idea of
mechanical, chemical, physical.
PE Film Recycling Machine For Washing Recycling Line | |
| |
| Belt conveyor | Load the plastic raw material to the Crusher |
| Crusher Machine | Cut plastic into flakes with water for pre-washing and good for crusher blades |
Friction washer | Combined with Crusher.To have pre-wash and centrifugation of the flakes |
| Screw feeder | Load the film scrap |
| Floating washer | Hot washing/cold washing for customized. |
| Screw discharger | Load the flakes |
| High speed friction washer | Remove water/glue/dirty from flakes by strong forced friction and centrifugation. |
| Floating washer | To clean again |
| Screw discharger | Load the flakes |
| Horizontal dewatering machine | To dry the flakes. Final moisture can be about 1.8% |
| Thermal dryer | Reduce humidity to be less than 1% |
| Zigzag separator | Remove dust/fines/labels |
| Silo | Storage the cleaned, dried flakes |
| Electrical cabinet | Control the full line |
Machine Photos
Crusher Machine
>> Knife holder structure adopts a hollow knife structure design,
which can better cut hollow plastics during crushing.
>>The output is 2 times higher than the ordinary crusher of the same
model
>>suitable for wet and dry crushing.
>>The chamber with wear-proof design
>>Conbined with low speed friction washer
High speed friction washer
>>It is mainly used for strong friction cleaning,adopting spiral
blade structure, medium and low speed friction principle to reduce
or remove the adhesion of contaminants to the material.
>>Centrifugal the contaminants onto the screen, and adding
clear water removes the sediment on the material through the
centrifugal action during the operation, and clean the materials
efficiently.
Floating Washer
>> flotation washer for cleaning size reduced plastic scraps, by
rotary paddles and water, which can remove most of the dust,sands,
sludge, soil and other sink contaminants.
>>The main principle is to use the specific gravity of
water,specializing in the initial wash and rinse of submerged and
floating materials,it can effectively separate the sediment and
metal in the material. The system will discharge the sink
contaminants,such as sands, sludge, sink plastic, metals through
the pneumatic bottom valves automatically. It will ensure the good
washing condition of water.
>>It is mainly used for removing moisture from the film/bags and
other soft material. It can efficiently remove the humidity from
soft plastic materials.
>>The equipment adopts centrifugal force to dry materials.To
reduce the moisture content of the material to below
10% without melting.
● In order to ensure the accuracy of each part, we are equipped
with a variety of professional processing equipment and we have
accumulated professional processing methods over the past years.
● Each component before assembly needs strictly control by
inspecting personnel.
● Each assembly is in charged by a master who has working
experience for more than 20 years
●After all the equipment are completed, we will connect all the
machines and run the full production line to ensure the stable
running in customers' factory
Our Service
1.We will provide testing if the customer comes to visit factory to
see the machine.
2.We will provide detail machine technical specification ,electric
diagram,installation,operation manual and all the documents which
customer needed for clearing customs and using the machine.
3.We will provide engineers for helping installation and training
the workers at customer's site.
4.Spare parts are available when they are needed .Within warranty
time,we we will provide spare parts free,and over warranty time,we
will provide spare parts with factory price.
5.We will provide technical support and repair service in the whole
lifetime .
