Active Member
|
[China]
Address: Zhangjiagang city,Jiangsu Province,China
Contact name:
Zhangjiagang YiMing Machinery Co.，Ltd |
|
|
Wood shavings and branches in the forest are good materials that can be recycled and used as decoration materials. For the processing of branches and leaves, it is necessary to use professional equipment. One hundred of them are wood flour mill 600.
The working principle of wood 600 pulverizer is as follows:
Sawdust input hopper, vibrating
feeder in milling after grinding mill in the warehouse, warehouse,
suction can use centrifugal force device and fan through the sieve
material through the pipe into the screening device, materials by
sieving, achieve fine material requirements of customers out of
direct loading bags, and did not meet the requirements of the
coarse material again through the pipe back to warehouse to
grinding mill. In the whole grinding process, a small amount of
dust produced by the wood 600 pulverizer is directly sucked into
the dust collecting cloth by the fan, and there is no dust entering
into the air.
Feature
1, Compared with other pulverizers, the capacity is 20-50 percent increased with same power and the energy is saved.
2, Install the dust collection device, reduce the dust pollution effectively.
3, The labor is reduced with fan discharge.
4, The door of main machine can be opened which is convenient to maintain and replace blades.
5, Adopt double cold(water and fan),the inner temperature of body is decreased and the material pulverized is not distortional. t is beneficial to pulverize the thermo-sensitive plastic, for example PVC,PE,PET,LDPE,PS,EPS,XPS,ABS,EVA,PPC.
Usage
1, With water spray cooling system. it is suitable for processing of thermal sensitive material. With unique water spray cooling system. When the temperature of main machine is higher than setting temperature, water spray automatically until the temperature decreased normally.
Note: less of water spray into to machine will be dryed quickly which will not affect material properties. It can be installed by your requirements.
2, The raw material become power by vibration principle of ultrasonic vortex wave pressure which is from the high speed rotating of main shaft.
The material is conveyed to screening system by wind conveying. The coarse materal is back to the milling chamber automatically, then pulverized again.
3, The blade adopt high quality steel which is treated by heating.after heat treatment, with good abrasion resistance. It is suitable for continuous running.
4, This size of machine is small with compact structure, fully sealed, no dust overflow.
5, The material is transferred based on own wind pressure.
Technical Specification
| Type | YMSMP-600 | ||
| Electricity | 380V/3PHASE/50HZ | ||
| Power | Main motor | 45kw | |
| Fan | 4kw | ||
| Main motor | Rotating motor | 30pieces | |
| Fixed blade | 15pieces | ||
| Feeding | automatic | vibration | |
| Colling mode | water | AIR-cooled | |
| Rotating speed | minute | 3700rpm | |
| Capacity | H | 120-320KG | |
Electrical Equopment
Shaft | contactor1 | delixi | CJX-2-80 220V |
| contactor2 | delixi | CJX-2-150 220V | |
| SKF | 6314 | ||
| Dusting | bag | ||
Protection equipment | High and low voltage protection Overload protection Suction device Dust collecting bag protection with 9 bags | ||
