PVC pe ppr pipe tank water machine two chambers vacuum calibrator
table water pressure tank
PVC pe ppr pipe tank Description
- The production line with high efficiency single screw extruder and
through the spiral or basket type mould by multi - Crawler traction
machine vacuum sizing cooling and as is known to all,
large-diameter PE pipe are tractive pipe variety, Shuanglin
specially developed rapid traction switching device, so as to solve
the the problem. By the appropriate transformation part of the
unit, you can achieve a two-layer or multi-layer co extruded,
replacing the extruded layer material or add special materials
according to the requirements of the use, such as flame retardant,
antistatic, corrosion resistance, nano antibacterial materials,
greatly improving the pipe use, reduce raw material consumption,
thereby reducing the cost of pipes.
- The production line using PLC control system, man-machine dialogue
interface, simple operation, stand-alone adjustment, the full board
linkage, automatic fault alarm, production and reliable.
Application
- PVC Pipes Extrusion Machine System for drinking,Plastic Pipe
Extrusion Equipment for PVC and UPVC, PVC Plastic Extruder
Production Line for pipe.
- 16mm-630mm Plastic pipe production line for pvc pipes PVC Pipe
Making Machine with price, PVC Pipe Extrusion Line, Pipe Production
Line.
- PVC Pipe Machine Line, PVC Drainage Pipe Production Line, soft PVC
pipe machine, PVC Tube Machine.
PVC profile vacuum forming table Features
- This machine is composed of vacuum pump,water pump,the automatic
balance of draining and watering.In addition,it has a
front&back mobile device and a high&low adjusting
device.This machine can adjust by three-dimensional.
- Sizing range : φ50~φ160
- Center height : 1000mm
- Length of vacuum Tank : 6000mm
- Vacuum pump power : 3kw×1set Shanghai Xinhuan
- Water pump power : 4kw×1set 3kw×1set Shanghai Xinhuan
- Cooling way : spray washer
- Moving motor power : 0.75kw
Technical information (FYI)
Items | YF180 | YF240 | YF300 | YF600 | YF900 | YF1200 |
Max. width of board(mm) | 180 | 240 | 300 | 600 | 900 | 1200 |
Drawing height (mm) | 150 | 150 | 150 | 150 | 150 | 150 |
Drawing force (KN) | 20 | 20 | 20 | 30 | 40 | 50 |
Drawing speed(m/s) | 0-5 | 0-5 | 0-5 | 0-3 | 0-2.5 | 0-2.5 |
Auxiliary equipment sum power (kw) | 35 | 35 | 30 | 30 | 40 | 45 |
Cooling water consume (m3/h) | 6 | 6 | 6 | 9 | 12 | 15 |
Compression air (Mpa) | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
Application
- This line is used for production PVC/PC decoration material with
different shape and size for different application (Including
PVC/PC plastic doors and windows profiles, decorative plates, tiny
foaming profiles and decorative plates, etc)
- Vacuum calibration platform is used to cool, vocuum and calibrate
PVC ceiling wall panel, we use water to cool PVC ceiling wall
panel.
Product under processing