CHENGDU CHUANGRONG TRADING CO.,LTD |
|
PN6 50mm 90mm 110mm 315mm HDPE Draining Fittings Siphon Electro Fusion Anchor Tape
Description of HDPE Siphon Fittings
CHUANGRONG HDPE siphon pipes provide a one-stop solution for drainage.
System components of siphon HDPE pipe system,The complete proven and practical product range
consists of:
• Pipes
• Fittings
• Connections
• Fastenings
Siphon pipes and fittings are made of high-density polyethylene, it has significant advantages over tra
-ditional drainage systems. CHUANGRONG HDPE siphon pipe system has excellent mechanical pro
-perties, physical properties and chemical properties. High impact and abrasion resistance
Resistors are very flexible and offer multiple connection options.
These comprehensive characteristics make it very suitable as a drainage material,
It satisfies the needs of building drainage well, and the stable quality ensures the safety of drainage
solutions.
Main Reason to choose CHUANGRONG HDPE Siphon pipe and Fittings
1. Resistance to radioactive effluents
There is no risk of damage caused by medical waste. However, for more information on specific appli
-cations, ask the manufacturer.
2. Resistance to abrasion
HDPE is highly abrasion resistant; its extra thick wall provides
Additional protection. Pipe abrasion resistance is a particularly important factor in branch pipes and se
-wers. Chimney and ground pipes. HDPE is highly abrasion resistant; its extra thick wall provides addit
-ional protection.
3. Solar radiation
Taking into account the heat and expansion of the exposed area, Geberit HDPE pipes can prevent UV-
induced aging and embrittlement, and added stabilizers.
4. Noise
HDPE limits solid conduction,
However, airborne noise should be isolated. HDPE is a soft material with low Young's modulus. This can
be done through pipes or lagging.
5. Chemical resistance
CHUANGRONG HDPE has high chemical resistance: HDPE is only soluble in aliphatic and aromatic car
-bon and its chlorinated products exceeding 90 ° C, and insoluble in all solutions at 20 ° C. The material
will be exposed to severely oxidized media (concentration HN03, concentrated H2 S04) for a long time
at room temperature.
6. Smooth inner wall, and does not change with time, small frictional resistance,save energy, the pres
-sure loss about 30% smaller than the steel tube,can choose smaller than steel pipe diameter. Health
performance is good, no additives, no possibility of pollution of drinking water, ISO standard grading
polyethylene material level 0 (the lowest), no mildew material, compared with some other commonly
used plastic material of polyethylene is much mildew resistance, use for a long time also not fouling.
7. Polyethylene pipe can be welded joint with pipe become an organic whole, without the possibility
of joint leakage, water saving, reducing operation cost and maintenance cost examination, pipe can
be manufactured in any length, but the flexible layout, saving fittings.
8.PE pipe installation available welding or fused to form a
completely closed seepage control system.
9. Light, easy to install, handling, connection, construction is
convenient and reliable.
10.Has good flexibility, small can winding pipe, pipe winding along
the ditch, can resist formation geolo
-gical change, can be used as liner repairing old pipeline.
11. Good low temperature resistance, corrosion resistance, long life, buried pipeline within to 40 °C and
40 °C.
Spcification of Siphon HDPE Fittings Electro Fusion Anchor Tape
SIZE(mm) | 50 | 56 | 63 | 75 | 90 | 110 |
SIZE(mm) | 125 | 160 | 200 |
Application of Syphon HDPE Fittings
1)Garden project: planting underground garage roof, green roof, soccer fields, golf courses, beach, saline,
desert planting.
2)Construction: basement floor level seepage, construction basis of
the upper, lower, basement seepage
level facades, insulation.
3)Traffic engineering: tunnels, roads, railway embankment, dams,
slope protection.
4)Municipal Engineering: Metro, road embankment, landfill
5)Renovation: moisture, noise, vibration, threading.
Batch Production and Loading of Siphon HDPE Fittings and Fastening Materials
Certifications of Siphonic HDPE Fittings
We can supply ISO9001-2008, BV ,SGS, CE etc certification.
All kinds of products are regularly conducted pressure-tight
blasting test,longitudinal shrinkage rate test, quick stress crack
resistance test, tensile test and melt index test, so as to ensure
the quality of products totally reach the relevant standards from
raw materials to finished products.