|
[China]
Trade Verify
Address: Room 904, No. 6, Hanxing 3rd Street, Zhongcun Street, Guangzhou, Guangdong, China
Contact name:Amanda Chan
Xinda pelosi co.,limited |
|
Verified Suppliers
|
|
|
| Product Name | PET/PE/PP bottle heat seal aluminum foil induction cap seal liner |
| Raw Material | heat seal+AL+cardboard / foam /pulp paper |
| Thickness | Aluminium Foil: 20-40 microns (0.02 mm - 0.03mm)PE/PET/PP Layer: 40-50 microns (0.04 - 0.05 mm) |
| Peel type | Easy peel and non-easy peel seal available |
| Usage | Perfume packing, cosmetic packing, medical packing , |
| Seal diameter | 10mm - 180mm |
| Usage | screw cup bottle of plastic and glass for food and pharmaceutical packs etc |
| Application | 1- Motor, Engine, and Lubricant Oil products |
| 2- Edible Oil products | |
| 3- Medicine products (Pharmaceutical factories for Tablet, Gel, Cream, Powders, Liquids, etc) | |
| 4- Food Products | |
| 5- Beverages, Fruit Juice, Butter, Honey, Mineral Water | |
| 6- Pesticides, Fertilizers, and Chemicals | |
| 7- Cosmetics |
1. Self adhesive. Easy to use. No need to use the induction
machine, just by hand.
2. Sealing for freshness, and Prevent contamination& leakage.
3. Nontoxic and tasteless. Food grade.
4. Sealing for solid and dry food, medicines and cosmetic.
Product Description of PET/PE PP Cup Sealing Film induction aluminum foil heat seal liner:
Aluminum foil induction/pressure sensitive seal liner is suitable
for PET, PVC, PS, PP, PE plastic bottles, and is mainly used for
foods,cosmetics, pharmaceuticals, pesticides, chemicals,
commodities products packaging.
Aluminum foil induction seal liner
1. Aluminum foil induction seal liner is formed by cardboard
backing, plus aluminum foil and heat seal film layer, after
induction of seal-capping, it will be automatically divided into
two pieces.
2. Bottle cap heat seal film layer can apply welded heat seal or
easy-to-tear heat seal to the bottle as required by the contents.
Aluminum foil pressure sensitive seal liner
1.Pressure sensitive seal liner is composed of PS foaming with
pressure-sensitive adhesive on the reverse side.This seal liner can
sealing on the bottles by hand without use induction machine.For
excellent adhesion to the lip of plastic, glass, and metal
container.
2.The front side can be printed the LOGO according to customer’s
requirement, and cut size by the customer-specific .The pressure
sealing material is widely used in the world.
1. There should be no water, oil and other substances around the
bottle mouth.
2.The bottle should be a complete plane, no gap, concave &
convex, burrs, etc.
3. Before tightening the bottle and lid, could be no
gap between them.
4. Heat sealing layer need to clean, not contaminated.
5. keep at room temperature (below 70°F/21 ℃), avoid high
temperature and direct exposure to the sun.
1. Seals in freshness
2. Prevent costly leaks
3. Reduce the risk of tampering, pilferage, and contamination
4. Extend shelf life
5. Create hermetic seals
6. Environment friendly
1, Quantity needed is?
2, Diameter needed is ?
3, Material of your container? PE/PET/PP/PVC/glass/metal ?
4, What kind of materials that will be packed?
