|
[China]
Trade Verify
Address: No.12, Yuefeng Road, Nanfeng Town, Zhangjiagang City, China
Contact name:Batsita
Zhangjiagang Beisu Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
The minimum diameter of the cutter head of the SMF PVC grinder machine is 400mm and the maximum is 800mm, which belongs to the turbo-type pulverizer series. Mainly used in the field of hard PVC recycling, such as the recycling of defective PVC pipes, profiles, plates and leftover materials.
Features of SMF-400 PVC grinding machine:
(1) Compared with similar mills, the output is greatly improved
(20%-50% increase) at the same power, and energy consumption is
saved.
(2) A dust collector is added, which effectively reduces dust
pollution.
(3) The discharge of the main fan reduces the labor intensity of
the operators.
(4) The door cover of the main machine can be opened, which is
convenient for maintenance and tool replacement.
(5) The use of wind and water double cooling can better reduce the
working temperature in the machine body, and the materials
developed are not easy to change. At the same time, it is also
conducive to the grinding of heat-sensitive plastics. Part of PE
and ABS can be ground.
The working principle of SMF-400 PVC grinding machine:
A1: The working part of the machine is the cutter head. The
high-speed particles are partially crushed after impacting the
tooth plate and drawn out by suction, while the larger particles
continue to impact and are drawn out after crushing. This reduces
the load on the cutter head, improves the grinding efficiency, and
enables the powder to be evenly cooled.
A2: Low temperature is the main advantage of this machine. In terms
of thermal power equivalent: it is converted into 860 kcal of heat
per hour after the work is done. This machine is external
ventilation. The air volume reaches 50m/KW, and most of the heat is
taken away by the temperature difference between the inlet and
outlet air. A small part of the heat is solved by water cooling.
The inlet temperature of the cold water is required to be no more
than 25°C, and the outlet water temperature is no more than 45°C.
In summer, the cooling water flow should be appropriately increased
to lower the temperature.
Parameters of PVC grinder machine:http://www.beisu-extrusion.com
| Model | 400 | 500 | 600 | 800 |
| Motor power(kw) | 22 | 37 | 45 | 55 |
| Blower power(kw) | 3 | 3 | 5.5 | 11 |
| Dust collector | 4 | 9 | 16 | 24 |
| Total power(kw) | 31.5 | 42 | 52 | 90.5 |
| Feed diameter(mm) | <18 | <18 | <18 | <18 |
| Discharge size(mesh) | 10-80 | 10-80 | 10-80 | 10-80 |
| Capacity(kg/h) | 100-150 | 200-250 | 300-400 | 400-500 |
| Dimension(L*W*H) | 2000*1800*26000 | 2500x2000x3000 | 3200x2600x3200 | 3500x2400x4000 |
