Active Member
|
[China]
Address: No.417, Yangjin Road, Jinfeng Town, Zhangjiagang City, Jiangsu, China
Contact name:Wendy Chen
YILI MACHINERY Co., Ltd. |
|
|
PVC Pipe Extrusion Line
Introduction
The profile or tube are pulled by an haul-off unit so that the line
it is always in motion. Finally, depending on the flexibility of
the product, a cutting or winding unit prepares the product for
distribution.
In the head there is much of the secret of a good product. It can
be a model with porta mandril, with spiral, or with lateral feed.
Each of these designs provides a different flow.
The calibration bench, if we talk about pipelines, has the function
of providing to the pipe a specific diameter and the circular shape
that the product requires. You can do the calibration using vacuum
or pressure.
Technical Specification
| 33D Series Classical Production Line: | ||||
| Model | OD (mm) | Extruder | Max. Output (kg/hr) | Max.Haul-off speed (m/min) |
| PEG63 | Φ20-63 | SJ65/33 | 220 | 15 |
| PEG110 | Φ20-110 | SJ65/33 | 220 | 15 |
| PEG160 | Φ50-160 | SJ75/33 | 400 | 12 |
| PEG250 | Φ75-250 | SJ75/33 | 400 | 10 |
| PEG315 | Φ90-315 | SJ90/33 | 500 | 8 |
| PEG450 | Φ110-450 | SJ90/33 | 500 | 5 |
| PEG630 | Φ280-630 | SJ120/33 | 850 | 3.3 |
| PEG800 | Φ400-800 | SJ120/33 | 1000 | 1.8 |
| PEG1200 | Φ800-1200 | SJ150/33 | 1300 | 0.8 |
| 38D Series High Efficient Production Line: | ||||
| Model | OD (mm) | Extruder | Max. Output (kg/hr) | Max.Haul-off speed (m/min) |
| HPEG63 | Φ20-63 | HSJ60/38 | 320 | 30 |
| HPEG110 | Φ20-110 | HSJ60/38 | 380 | 25 |
| HPEG160 | Φ50-160 | HSJ60/38 | 460 | 15 |
| HPEG250 | Φ75-250 | HSJ75/38 | 600 | 12 |
| HPEG315 | Φ90-315 | HSJ75/38 | 650 | 10 |
| HPEG450 | Φ110-450 | HSJ90/38 | 800 | 8 |
| HPEG630 | Φ280-630 | HSJ90/38 | 950 | 5 |
| HPEG800 | Φ400-800 | HSJ120/38 | 1300 | 2.5 |
| HPEG1200 | Φ800-1200 | HSJ75/38 HSJ90/38 | 1400 | 1.2 |
| HPEG1600 | Φ1000-1600 | HSJ90/38 HSJ90/38 | 1600 | 0.7 |
Tech Features & Advantages
Technology Process
- High performance Extruder, which is the key important part in the whole production line, it ensure high capacity, high efficiency and excellent plasticization
- Mould
Material: 40Cr
Design: Spiral or Basket
Single layer or Multi-layer design
- Vacuum tank
Material: SUS304, 5mm-7mm
Automatic water temperature and level control technology
Accurate calibration
- Cooling tank
Material: SUS304, 3mm-5mm
Fast cooling
- Haul-off
Drive: by frequency inverter to servo motor driving
High quality rubber belts or blocks
With encoder for pipe metering
- No-dust cutter
Design: Universal or Cast Aluminum fixture unit
No-dust smooth cutting
Servo motor synchronization control
- Stacker
Pneumatic discharging
Automatic pipe arranging
