Flexible Layout Planetary Cement Mixer PMC250 Cast Stone Materials Hydraulic

Flexible Layout Planetary Cement Mixer Cast Stone Materials PMC250

Maintaining Door

The safety control device ensures that the mixer will not start during maintenance. Large size maintaining door for easy maintenance and cleaning.

Hydraulic Unit

The hydraulic discharging system is equipped with manual door opener, which can be opened manually in case of power failure.

Discharging Door

The limited switch installed, can be convenient to set the size of the door according to the need. At most three discharge doors can be opened.

According to the material situation, different device can be selected to make the stirring speed faster, and the stirring is more uniform, without the phenomenon of stacking.

Hydraulic System Maintenance Instruction

1.Switch off the auto-control loop while using manual hydraulic system. Turn on manual stop valve and pull switching handle on the manual pump to the utmost. Then pull the handle to open the discharge door. Pull the handle in reverse to close the discharge door;

2. Before starting the hydraulic system, ensure nobody inside the machine and all he manual valves have been switched off;

3. The pressure of flood valve has been strictly adjusted to standard. Non-professional persons are forbidden to adjust the pressure;

4. ISO-UNI HM46 hydraulic oil is recommended. Fill the oil to two thirds level of the indicator.

Features of Planetary mixer

Planetary mixer is a new type of high efficiency, stirring without dead corner equipment; it has a unique form of stirring. Planet drive the two stirring shaft turns around the material barrel, at the same time, the stirring shaft is high-speed operation, so that the material is strong shearing action, achieve full dispersion and mixing effect. In addition to the equipment within the knife scraping wall around the cylinder axis rotation, will be stuck on the wall material scraping and then put them into mixing shear, that make no residual material in the mixer and mixing effect is more ideal. Cylinder with special seal structure and have the pressure or vacuum stirring. Mixer has good deaeration effect, the cylinder body can be designed to be heated or cooled according to customers' needs. The cover is hydraulic lifting, convenient to operate and clean and the cylinder body can move freely.