Home Companies SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD(Pipefittings Department)

Seamless Long Nipple With SCH40 SCH80 SCH160 XXS

SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD(Pipefittings Department)

Contact Us

[China] country

Trade Verify

Address: No. 368 Youyi St. Shijiazhuang, Hebei, China

Contact name:Maria Lee

Inquir Now

SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD(Pipefittings Department)

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Seamless Long Nipple With SCH40 SCH80 SCH160 XXS

Country/Region china
City & Province shijiazhuang hebei
InquireNow

Product Details

SEAMLESS LONG NIPPLES WITH SCH40 SCH80 SCH160 XXS

 

Long Screw pipe Nipples with thickness of SCH40/SCH80/SCH160/XXS provide a connection between pipe sections, thus forming pipes for different types of fluids. A direct consequence of this function is that they are subjected to numerous and often prolonged solicitations. It is therefore necessary that they are made of materials that guarantee adequate mechanical strength and
high corrosion resistance. The most commonly used material is therefore stainless steel,

 

The nipples in normal types as below: 

Barrel pipe nipple: this type of nipple has a tapered NPT thread on both ends and the central section is unthreaded;
T.O.E. pipe nipple: In this case we have a nipple that has a thread on only one of the two sides, usually used as feet for oil containers;
Weld pipe nipple: Similar to the previous type, but with the difference that there is a chamfer on the unthreaded end, required to facilitate subsequent welding. Ideal for use in extreme conditions such as vibrations, pressure fluctuations and temperature changes

 

Product Information/Product Description/Basis Information/Specification

 

Products NameSEAMLESS LONG NIPPLES WITH SCH40 SCH80 SCH160 XXS
TypesClose Nipple, long nipple, barrel Nipple, Swage Nipples, TBE nipple, PLE nipple, TSE nipple, BLE nipple, TLE Nipple, PSE nipple
Size1/8"-6"
Wall Thickness

,SCH20 ,SCH30,STD,SCH40S,SCH60,XS,SCH80S,SCH100,SCH120,,SCH160S,XXS

,DIN, SGP JIS thickness

ConnectionThreaded Ends NPT, BSPT, BSPP ANSI B1.20.1, BS21, DIN2999
Design StandardASTMA733 DIN2982 DIN2988 BS3187 EN10241:2000
Material Grade

 

Carbon Steel A106GR.B A53GR.B, ST37 RST37.2

 

Stainless Steel304, 304L, 304H, 316, 316L, 316H, 310, SS321, SS321H, 347, 347H, 904L

Duplex SS 2507, DSS2205, UNS31803 UNS32750, UNS32760
1.4301,1.4306, 1.4401, 1.4435, 1.4406, 1.4404, 1.4462, 1.4410, 1.4501
SurfaceBlack, Electric Galvanized, Cold Galvanized, Hot. Dipped Galvanized, zinc Plated

 

NPSODLPipe Nipple Lengths
ininin
1⁄80.4053⁄411⁄2221⁄2331⁄2441⁄2551⁄2681012
1⁄40.547⁄811⁄2221⁄2331⁄2441⁄2551⁄2681012
3⁄80.675111⁄2221⁄2331⁄2441⁄2551⁄2681012
1⁄20.8411⁄811⁄2221⁄2331⁄2441⁄2551⁄2681012
3⁄41.0513⁄811⁄2221⁄2331⁄2441⁄2551⁄2681012
11.31511⁄2 221⁄2331⁄2441⁄2551⁄2681012
11⁄41.6615⁄8 221⁄2331⁄2441⁄2551⁄2681012
11⁄21.913⁄4 221⁄2331⁄2441⁄2551⁄2681012
22.3752  21⁄2331⁄2441⁄2551⁄2681012
21⁄22.87521⁄2   331⁄2441⁄2551⁄2681012
33.525⁄8   331⁄2441⁄2551⁄2681012
44.527⁄8     441⁄2551⁄2681012
55.5633      41⁄2551⁄2681012
66.62531⁄8      41⁄2551⁄2681012

 

EN 10241:2000 BSPT BSPP

 

SIZEType 01Type 02
ODThickLengthWeightODThicknessLengthWeight
1/8"14.02.7170.02315.0003.20019.0000.018
1/4"18.53.2250.02818.5003.53027.0000.034
3/8"21.33.2260.03222.0003.53028.0000.041
1/2"26.43.8340.06927.0004.18037.0000.074
3/4"31.83.8360.09232.5004.19039.0000.104
1"39.54.6430.15739.5004.66046.0000.153
1-1/4"48.34.7480.24049.0005.02051.0000.240
1-1/2"54.84.7480.25156.0005.58051.0000.340
2"66.34.8560.38868.0005.67060.0000.501
2-1/2"82.04.9650.49484.0005.90069.0000.742
3"95.05.0710.61598.0006.54075.0000.957
4"122.06.0831.175124.0006.97087.0001.579
5"147.06.0921.530151.0007.76096.0002.306
6"174.06.5921.9001788.57963.310

 

Features /Characteristics

 

Steel Pipe used for Schedules 40 & 80 welded nipples conforms to ASTM A53

Steel Pipe used for Schedule 80 nipples conforms to ASTM A106 Grade B

Both welded and seamless steel nipples conform to ASTM A733

NPT threads on all nipples conform to ASME B1.20.1

Independent lab verification that fittings meet applicable chemical & physical propert

 

Application and usage:

 

Electric power, oil and gas, petrochemical, chemical, marine, heating,

Metallurgy

 

Reference Standards

 

ASME B16.9 Specification for Butt Welded Fittings

ASME B16.9 specification is designed for butt welded fittings applied in industrial construction pipelines. Including elbow, tee, cross, cap, reducer, and etc.

 

Standard Scope

The standard includes specifications of NPS 1/2 to NPS 48 (DN15-DN1200) factory-made wrought butt-welded pipe fittings overall dimensions, tolerances ratings, test methods and markings.

 

Special Fittings

Special fittings here refer to special sizes, forms and tolerances that agreed between buyer and manufacturer.

 

Fabricated Fittings

Fabricated laterals and other fittings by circumferential or intersection welds are considered pipe fabrication could not apply this standard.

 

Units under ASME B16.9 shall be stated in both SI (Metric) and U.S. Customary units. Designation for size is NPS.

 

 

Reference Standards

It is not considered practical to identify the specific edition of each standard and specification in the individual references. A product made comply with a prior edition of referenced standards and in all other respects conforming to this standard will be considered complied.

 

ASME B16.5: Pipe Flanges and Flanged Fittings: NPS 1∕2 Through NPS 24 Metric/Inch Standard

ASME B16.25: For Buttwelding Ends

ASME B31: Code for Pressure Piping

ASME B31.3: Process Piping

ASME B36.10M, Welded and Seamless Wrought Steel Pipe

ASME B36.19M, Stainless Steel Pipe

ASME Boiler and Pressure Vessel Code

ASTM A234/A234M-17, Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

ASTM A403/A403M-16, Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASTM A420/A420M-16, Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low Temperature Service

ASTM A815/A815M-14e1, Specification for Wrought Ferritic, Ferritic/Austenitic and Martensitic Stainless Steel Piping Fittings

ASTM A960/A960M-16a, Specification for Common Requirements for Wrought Steel Piping Fittings

ASTM E29-13, Practice for Using Significant Digits in Test Data to Determine Conformance With Specifications

ASTM B361-16, ASTM B363-14, ASTM B366/B366M-17: For other material metals. (Aluminum, Titanium, Nickel, and alloy)

 

 

Our Service

 

1. Technical support

2. Raw Material Quality control.

3. Inspection during the production time.

4. Final Test includes Surface, Dimension, PT Test, RT test, ultrasonic Test

5. Test Report each shipment

4. Flexible Delivery terms. EXW FOB CIF CFR DDP DDU

5. Flexible payment Ways: LC. TT. DP

6. Customized Package includes Logo. Cases Dimension.

7. 18 months quality Guarantee time.

9. Free replacement by air if any error founded

10. 24 hours to Feedback your questions

Hot Products

Health Balance Magnetic Size Adjustable Braided Rope Necklace for Sports Description: Item Health ...
A Rubber Expansion Joint is a flexible unit that is manufactured from natural or synthetic ...
barrier Type Cast Iron Diaphragm Valve With Flange Ends Description PN10 PN16 Cast Iron barrier type ...
ZINC GALVANIZED KING NIPPLES FOR HOSE PIPES King Combination Nipples , also called KC nipples or ...
ZINC GALVANIZED HOSE MENDOR FOR HOSE PIPE Hose Mender also called combination Nipples, which is used ...
Hot Dipped Galvanized Combination Nipple For Hose Pipe The HDG combination KC nipples made from ERW ...