Hebei Zexu Pipe Manufacturing Co., Ltd. |
|
Professional Production And Processing Of Various Types Of Steam Blowing Aluminum Target Plate
The aluminum target plate for purging experiment, the
specifications and models are customized according to customer
needs, our company specializes in the production of aluminum target
plate, the price is favorable, the quality is good,
1. After the strength test of the pipeline system, before the air
pressure tightness test, purging and cleaning should be carried out
in sections
2. The purging method should be determined according to the use
requirements of the pipeline, the working medium and the degree of
dirt on the inner surface of the pipeline. Liquid or gas pipelines
with a nominal diameter greater than or equal to 600mm should be
cleaned manually, and liquid pipelines with a nominal diameter less
than 600mm should be cleaned manually. Use water to clean the gas
pipeline with a nominal diameter of less than 600mm, it should be
purged with air. Steam piping should be purged with steam, and
non-thermal piping should not be purged with steam. The purging of
the gas is generally carried out in sequence by the main pipe, the
branch pipe, and the dredging pipe.
3. Before the pipeline is flushed, a detailed flushing plan should
be prepared and carried out according to the system section.
4. Equipment and pipelines that are not allowed to be purged are
separated from the purge system.
5. After the pipeline cleaning is qualified, in addition to the
specified inspection and recovery work, no other work that affects
the cleaning of the pipe shall be performed, and the "Pipeline
System Blowing Record" shall be filled out.
Power system of newly built power plants (or overhauled power plants): the high-temperature and high-pressure steam generated by the boiler sweeps the steam conveying pipeline to prevent corrosion and debris in the pipeline from entering the steam turbine and damaging the turbine blades. A target plate is set in front of the blowpipe. Blow once, check the scar on the target board, then change a target board and continue to blow until the "scar" is qualified. The material requirements of the aluminum target plate are: pure aluminum plate, 1050/1060/1070/1100/, thickness: 0.1-20mm, surface finish: 0.2-0.4
When medium-pressure steam is purging, the temperature is high, the
flow rate is fast, the noise is large, and it is colorless and
transparent. Therefore, attention must be paid to safety when
purging. The discharge port must be equipped with noise reduction
equipment, and the discharge port must be led to the outside and
face upwards. , A barrier should be set up around the discharge
port, and no one is allowed to enter the barrier during purging. In
order to prevent personnel from accidentally entering the scope of
the purge port and causing personal accidents.
During steam purging, the steam supply boiler must supply steam
continuously due to the large amount of steam consumption and the
large variation in height.
Material | Aluminum Target |
size | customize |
thickness | customize |
surface | mirror or customize |
delivery time | 3-10 work days |
packing | carton |